Hayward - Clorador de sal AquaRite Plus NG – 16 gr/h
Envíos 1-2 semanas
Certificado tienda en línea
Devoluciones fáciles dentro de 14 días
¿Buscas consejo?
Hayward AquaRite Plus NG salt chlorinator – 16 g/h
The AquaRite Plus NG makes its own chlorine from salt dissolved in the pool water, so there is nothing to dose by hand and no chlorine to store. It produces up to 16 g of chlorine per hour, enough for a pool of around 75 m³, and adjusts output anywhere between 0 and 100 %.
Where it differs from a plain chlorinator is the rest of the pool. The same 4.3″ touchscreen also drives your filtration pump (including variable speed), lighting and heating, plus four extra auxiliary relays your installer can assign to whatever else sits in the plant room.
Cómo funciona
Salt water flows through a transparent cell holding four titanium plates. A low-voltage current turns the dissolved salt into active chlorine, which disinfects the water and then reverts to salt — so the salt is not consumed, only topped up after backwashing or heavy rain. The cell cleans itself by reversing polarity, which keeps scale off the plates without dismantling anything.
The cell and the probe holder are both clear PVC, so you can see production happening and check the probes without opening the circuit.
Built to grow
The NG platform has a communication bus. Start with chlorination alone and add what you need later:
- pH control — BKPER-OPTION-PH (plastic probe) or BGKBPER (glass probe), with a 1.5 L/h peristaltic pump
- Redox / ORP — E-OPTION-REDOX or EG
- Temperature — T-OPTION-TEMP, which also unlocks smart filtration and heating control
- Free chlorine — H-OPTION-CL (amperometric) or H-OPTION-CL2 (membrane)
- Salinity — I-OPTION-SAL conductivity probe
- Remote access — RS4WI-OPTION-W (Wi-Fi) or RS4NET-OPTION-L (Ethernet), for the free Hayward Poolwatch app
Qué incluye
- Control unit with 4.3″ touchscreen
- Transparent electrolytic cell, 4 titanium plates, with 1.5 m cable
- Transparent PVC probe holder
- Mechanical flow switch and gas detector
Es bueno saberlo
Installation needs 63 mm pipework and a minimum flow of 5 m³/h. Salt has to be added once to reach the working concentration — anywhere from 3 g/l, and the unit also handles sea water up to 100 g/l. The titanium cell is a wear part rated for 8,000 operating hours.
For a larger pool, the same unit exists as 22 g/h (100 m³), 33 g/h (150 m³) and 50 g/h (200 m³).
Información adicional
| Marca: | Hayward |
|---|---|
| Referencia del fabricante: | 091018160000 |
| Producción de cloro: | 16 g/h |
| Volumen de la piscina: | Hasta 75 m³ |
| Output adjustment: | 0–100 % |
| Concentración de sal: | 3 to 100 g/l (salt water and sea water) |
| Cell: | 4 titanium plates, transparent PVC housing |
| Plate size: | 200 x 45 mm |
| Vida útil de la célula: | 8,000 hours |
| Autolimpieza: | Polarity reversal, installer configurable |
| Electrical output: | 15.5 A / 7 V |
| Consumo de energía: | 120 W |
| Fuente de alimentación: | 230 V CA, 50/60 Hz |
| Pantalla: | 4.3" touchscreen |
| Salidas de control: | Filtration, lighting, heating + 4 auxiliary relays |
| Flow detection: | Gas detector and mechanical flow switch |
| Minimum flow rate: | 5 m³/h |
| Diámetro del tubo: | 63 mm |
| Temperatura máxima del agua: | 45 °C |
| Presión máxima: | 4 kg/cm² |
| Dimensiones de la unidad de control: | 270 x 220 x 115 mm |
| Cell dimensions: | 355 x 305 x 305 mm |
| Cell cable length: | 1,5 m |
| Conectividad: | Modbus, optional Wi-Fi or Ethernet |
| Garantía: | 3 años |
En detalle
- Makes its own chlorine from salt — nothing to dose or store
- Runs the whole pool: filtration, lighting, heating and 4 configurable outputs
- Transparent cell and probe holder let you check production without opening anything
- Self-cleaning by polarity reversal keeps scale off the titanium plates
- Expandable later with pH, redox, temperature, free chlorine and salinity modules
- Optional Wi-Fi or Ethernet with the free Hayward Poolwatch app
- Works on salt water and sea water, 3 to 100 g/l
- Sized for pools up to 75 m³ — larger pools need the 22, 33 or 50 g/h version
- pH, redox and temperature kits are sold separately, so full automation costs more
- Needs 63 mm pipework and a minimum flow of 5 m³/h
- The titanium cell is a wear part, rated for 8,000 hours
