Pressure Pipe PE100 125mm × 7.4mm SDR17 10bar Black/Blue 12m DVGW - 7023748

Pressure Pipe PE100 125mm × 7.4mm SDR17 10bar Black/Blue 12m DVGW

Rated to a nominal pressure of 10 bar with a 125 mm outside diameter and a precisely engineered 7.4 mm wall thickness, this 12-metre straight length of PE100 pipe is dimensioned to SDR17 — the most widely specified class for commercial pool plant rooms, water mains, and large-scale hydraulic installations across Europe. Its DVGW certification confirms compliance with rigorous German drinking-water approval standards, making it a dependable choice wherever regulatory traceability is required.

Material & Pressure Performance

Manufactured from high-grade PE100 polyethylene — a material with a minimum required strength of 10.0 MPa — this pipe delivers long-term structural integrity under continuous hydraulic load. The SDR17 dimension ratio gives a balanced combination of pressure resistance and manageable wall thickness, well suited to pool plant pipework, pumped water transfer, and buried supply lines where operating pressures remain at or below 10 bar.

Black/Blue Co-extrusion & Burial Suitability

The distinctive black core with a co-extruded blue outer skin follows the European convention for potable and pressure water mains, providing immediate visual identification during installation and future excavation. The black PE100 core is highly UV-stable, while the plain (spigot) ends are ready for butt-welding or electrofusion jointing, as well as compatible stub-flange and electrofusion socket fittings in the same 125 mm SDR17 range.

Site Handling & Length

Supplied in a full 12-metre straight length, this pipe reduces the number of joints needed across a run, minimising potential leak points and cutting installation time on larger projects. At 125 mm OD it is appropriate for connecting main circulation pumps, filter vessels, and heat exchangers in commercial pool plant rooms, or for trunk mains feeding multiple pool circuits on a single site.