Mini Rain – Zwischenbehälter zur Regenwassernutzung 3 m³/h bei 2,7 bar BELGAQUA – MXAM 204 Pro – 7023575
Mini Rain – Break Tank for Rainwater Harvesting 3 m³/h @ 2.7 bar BELGAQUA – MXAM 204 Pro
Delivering 3 m³/h at 2.7 bar and rated to a maximum working pressure of 4 bar, this compact Mini Rain MXAM 204 Pro break tank is a fully integrated rainwater harvesting station in a 10-litre PE vessel — compact enough for floor installation without a dedicated plant room. It holds BELGAQUA approval, making it a compliant choice for Belgian installations where certification is a regulatory requirement. Connections are ¾” × 1″ male thread, keeping integration with standard pipework straightforward.
Pump, controller & dry-run protection
At the heart of the unit sits a Calpeda MXAM 204 self-priming horizontal multistage pump — a single-phase 230 V motor with built-in thermal protection — paired with a Logipress pressure controller that manages the ON/OFF cycle automatically. A dry-running protector safeguards the pump if the rainwater supply runs low, at which point the integrated 3-way valve switches the system over to potable mains water so that downstream demand is never interrupted.
Backflow prevention & water quality
As a true break tank, the unit provides an air gap between the harvested rainwater circuit and the mains supply, preventing any cross-contamination and meeting the EN 1717 standard for backflow prevention in European water supply systems. This makes it suitable for supplying non-potable end uses such as toilet flushing, garden irrigation, and pool top-up, while keeping the drinking-water network fully protected.
Installation & maintenance access
The unit is designed for floor installation and arrives as a pre-assembled station, reducing on-site commissioning time. The PE tank body is corrosion-proof and the connections on both sides of the housing allow flexible pipework routing. Routine maintenance — checking valves, fittings, and the float mechanism — is made easier by the accessible tank design, ensuring long service life with minimal downtime.
Zusätzliche Informationen
| Marke: | Mini Rain (Calpeda pump) |
|---|---|
| Modell / Typ: | Mini Rain MXAM 204 Pro |
| Modell: | MXAM 204 Pro |
| Typ: | Break tank for rainwater harvesting |
| Genehmigung: | BELGAQUA |
| Durchflussmenge: | 3 m³/h @ 2.7 bar |
| Maximaler Betriebsdruck: | 4 bar |
| Tank capacity: | 10 litres |
| Tank material: | PE (polyethylene) |
| Verbindung: | ¾" × 1" male thread |
| Pump: | Calpeda MXAM 204 (self-priming multistage) |
| Control unit: | Logipress |
| Spannung: | 230 V Wechselstrom |
Im Detail
- BELGAQUA-approved — meets Belgian regulatory requirements
- Automatic mains switchover via integrated 3-way valve
- Dry-run protection prevents pump damage
- Compact 10 L floor-mount design, ready to connect
- Calpeda MXAM 204 self-priming pump for reliable priming
- 10 L buffer tank suits low-demand use only — not high-volume supply
- Professional installation recommended for plumbing and commissioning