Zealux Inverboost inversor complet 075P - 7,5 kW
Enviament 1-3 setmanes
Certificat botiga en línia
Devolucions fàcils dins 14 dies
Busques consell?
Zealux Inverboost 075P – 7.5 kW
The Zealux Inverboost 075P is a full inverter pool heat pump designed for efficient heating and cooling of smaller pools. With smart capacity control, WiFi app operation and a durable ABS cabinet, it is built to extend your swimming season while keeping energy use under control.
- Designed for pools around 10–25 m³ (With pool cover).
- Full inverter technology with Turbo, Smart and Silent modes.
- WiFi control via the Inverboost app for temperature and scheduling.
Full inverter heating and cooling for small pools
The Inverboost full inverter system continuously modulates output instead of cycling on/off. This helps maintain a stable water temperature, improves comfort and can reduce running costs compared to fixed-speed heat pumps. Choose Turbo when you need fast heat-up, Smart for daily use, or Silent when low noise is the priority.
Because the unit supports both heating and cooling, you can warm the pool earlier in the season and also bring water temperature down during hot spells. Operation is designed for outdoor conditions down to -12°C ambient temperature, making it suitable for extended-season use when paired with a pool cover.
Key specifications of the Zealux Inverboost 075P
Volum de piscina recomanat: 10–25 m³ (With pool cover).
Potència de calefacció (Aire 28 °C / Aigua 28 °C / Humitat 80%): 7.5–1.9 kW.
Potència de calefacció (Aire 15 °C / Aigua 26 °C / Humitat 70%): 5.2–1.6 kW.
Efficiency (COP): Up to 16 (Depending on conditions and operating mode).
Intercanviador de calor: Twist titanium exchanger in PVC (Suitable for chlorinated and salt pool water).
Water connections: 50 mm.
Flux d'aigua recomanat: 2.5 m³/h.
Subministrament elèctric: 220–240 V / 50 Hz / 1 PH.
Sound pressure: ≤30 dB(A) at 10 m (Reported value).
Dimensions (L × A × H): 859 × 357 × 593 mm.
Pes net: 56 kg.
Durable cabinet and practical control
The ABS cabinet is designed with smooth curves and is described as rust-proof and UV-resistant, helping the unit keep its appearance outdoors. Control is available on the unit and via WiFi, allowing you to set target temperature, switch modes and plan heating times from your phone.
Notes d'instal·lació
For best results, install with adequate ventilation space and a correctly adjusted bypass so the heat pump receives the advised water flow. When automatic dosing is used, place chemical injection downstream of the heat pump and consider a check valve to protect the titanium heat exchanger.
Informació addicional
| Sèrie: | Inverboost |
|---|---|
| Model: | 075P |
| Capacitat màxima de calefacció (Turbo): | 7.5 kW |
| Gama de capacitat de calefacció (28/28): | 7.5–1.9 kW |
| Gama de potència de calefacció (15/26): | 5.2–1.6 kW |
| Gama COP (28/28): | 16–5.6 |
| Gama COP (15/26): | 7.1–4.5 |
| Volum de piscina recomanat: | 10–25 m³ (With pool cover) |
| Subministrament elèctric: | 220–240 V / 50 Hz / 1 PH |
| Connexió d'aigua: | 50 mm |
| Flux d'aigua recomanat: | 2,5 m³/h |
| Intercanviador de calor: | Intercanviador de titani Twist en PVC |
| Tipus de compressor: | Compressor inversor |
| Tipus de ventilació: | Horitzontal |
| Quantitat de ventiladors: | 1 |
| Pressió sonora (10 m): | ≤30 dB(A) |
| Dimensions (L×A×H): | 859 × 357 × 593 mm |
| Pes net: | 56 kg |
En detall
- Recommended for pools of 10–25 m³ (With pool cover).
- El funcionament amb inversor complet ajuda a reduir el consum d'energia.
- Heating and cooling for better season control.
- L'intercanviador de calor de titani és apte per a piscines d'aigua salada i amb clor.
- Es recomana fermament una coberta de piscina per a la màxima eficiència.
- No és ideal per a piscines més grans; tria un model amb més kW.
