Salta al contingut

Pressure Pipe PE100 90mm × 8.2mm SDR11 16bar Black/Blue 100m DVGW - 0706087

Bevo 0706087
Exhaurit
9.049,45  impostos inclosos.
Certificat Certificat botiga en línia
Devolucions fàcils Devolucions fàcils dins 14 dies
Pregunta Busques consell?
Fes la teva pregunta

Pressure Pipe PE100 90mm × 8.2mm SDR11 16bar Black/Blue 100m DVGW

Rated to a maximum operating pressure of 16 bar and supplied as a ready-to-lay 100-metre coil, this 90 mm OD PE100 pressure pipe is sized for the main supply and distribution runs found in commercial pool plant rooms, public facilities, and large residential installations. The SDR11 wall ratio (outer diameter eleven times the wall thickness) delivers the structural rigidity needed for buried and above-ground pressure lines, while keeping the pipe light enough to handle on site. The distinctive black core with co-extruded blue stripe follows the European colour convention for potable and pool water circuits, and DVGW approval confirms compliance with European drinking-water piping requirements.

Material quality & pressure integrity

Manufactured from high-density bimodal PE100 compound — minimum required strength (MRS) 10.0 MPa — the pipe offers excellent stress-crack resistance and long-term hydrostatic strength. The well-dispersed carbon black within the core provides inherent UV resistance, while the stabilised polymer matrix maintains structural performance across a wide range of ground and operating temperatures without the corrosion or scale build-up associated with metallic alternatives.

Joining & installation

Plain (spigot) ends are compatible with electrofusion fittings, butt-fusion welding, and compression couplings, giving installers full flexibility on site. The 100-metre coil minimises the number of joints required on long pool supply runs — reducing potential leak points — and the coil format allows the pipe to follow gentle ground contours without additional bends. Installation can proceed in cold and warm weather conditions without special precautions.

Pool & water-industry applications

At 90 mm OD this pipe suits high-flow mains supplies, primary circulation headers, and backwash discharge lines for commercial pool plant rooms, as well as buried supply feeds for outdoor leisure, irrigation, and bulk water transfer. Its 16 bar rating provides a comfortable safety margin over typical pool pump and water-supply pressures, and DVGW approval ensures the product meets the quality and safety standards required by European water authorities and pool inspectors alike.

Informació addicional

Marca: Sense marca
Pressió: 16 bar
Material: PE100 (HDPE, MRS 10.0 MPa)
Class / SDR: SDR11
Diàmetre exterior: 90 mm
Gruix de la paret: 8.2 mm
Classe de pressió: 16 bar
Color: Black core / blue stripe
Llargada: 100 m (coil)
Coneixement: Extrems plans (espiga)
Aprovació: DVGW

En detall

Pressure Pipe PE100 90mm × 8.2mm SDR11 16bar Black/Blue 100m DVGW – 0706087
9.049,45 
  • 16 bar rated — comfortable margin for pool and mains pressure
  • DVGW approved for European potable and pool water systems
  • 100 m coil reduces joints and site waste on long runs
  • PE100 bimodal compound delivers superior stress-crack resistance
  • Compatible with electrofusion, butt-fusion, and compression fittings
  • 100 m coil is bulky; requires adequate storage and handling space
  • Plain ends require fusion equipment or compression fittings — not tool-free