Tub de pressió PE100 75 mm × 4,5 mm lís SDR17 10 bar negre/blau 12 m DVGW - 7023745

Pressure Pipe PE100 75mm × 4.5mm Plain SDR17 10 bar Black/Blue 12m DVGW

Supplied in a full 12-metre straight length with a 75 mm outside diameter and a 4.5 mm wall thickness, this PE100 SDR17 pipe is rated to 10 bar continuous working pressure — the standard specification for pumped water transmission mains and pool plant-room supply runs. The DVGW approval mark confirms compliance with German and European standards for pressurised water service, making it a trusted choice for professional installers across Europe.

Material i classe de pressió

Manufactured from high-density PE100 polyethylene, the SDR17 dimension ratio delivers a 10 bar (PN10) pressure rating at 20 °C. The black body with a co-extruded blue stripe is the recognised industry convention for potable and non-potable pressurised water lines, aiding identification during installation and future maintenance. The plain (spigot) ends are compatible with electrofusion sockets and butt-fusion welding — both of which produce joints that are stronger than the pipe wall itself.

Installation & jointing

The plain end preparation means no sleeve or coupling is pre-fitted, giving the installer full flexibility to choose between electrofusion and butt-fusion jointing techniques to suit site conditions. At DN75, the pipe is well suited to below-ground trench installation with standard sand bedding, and its solid-wall construction resists point loads and ground movement over long service lives. Straight 12-metre lengths minimise the number of joints needed per run, reducing installation time and potential leak points.

Pool & water-system applications

This pipe size and pressure class is a practical choice for underground supply lines between plant rooms and pool shells, borehole-to-plant connections, and commercial filtration loop pipework where operating pressures remain within the 10 bar envelope. Its chemical resistance to chlorinated water and common pool treatment agents makes it compatible with the full range of pool water chemistry encountered in European commercial and residential installations.