Description
Meytec H2O electrode cleaning solution bottle 60 ml
The Meytec H2O electrode cleaning solution bottle 60 ml is a gentle, water based cleaner for pH, orp and conductivity probes used in
swimming pools, spas and small water treatment systems. It is designed to rinse and remove light deposits from sensitive sensor
surfaces after measurement, helping to keep readings stable and probes in good condition.
Purpose of the H2O cleaning solution
After every measurement, electrodes are exposed to pool water containing chlorine, salts and dissolved contaminants. If these residues
dry on the probe, they can slow the response and cause readings to drift. The Meytec H2O electrode cleaning solution is used to rinse
and clean probes directly after use, flushing away remaining chemicals and particles before the sensor is stored or moved to a
calibration buffer.
Because it is a mild, water based cleaner formulated for analytical probes, it helps remove residues without attacking delicate glass
membranes or reference junctions the way household detergents or aggressive cleaners might.
Compact 60 ml bottle for test kits and field use
This Meytec H2O electrode cleaning solution bottle 60 ml is supplied in a compact screw cap bottle. The small volume makes it easy to
add to portable pool test kits and service cases and is ideal when you maintain only a few instruments and want fresh solution for each
season.
- 60 ml of ready to use H2O electrode cleaning solution.
- Space saving bottle for residential pools and mobile technicians.
- Convenient size for occasional cleaning and on site checks.
The bottle format allows you to dispense only the quantity needed into a separate beaker or cup, avoiding contamination of the main
container.
Typical applications for pool and spa probes
The Meytec H2O electrode cleaning solution bottle 60 ml is suitable for routine care of most standard electrodes used around pools and
spas. It can be used with:
- Glass pH probes on handheld meters and pH controllers.
- Orp and redox probes that control disinfectant dosing.
- Conductivity and tds probes in simple water treatment systems.
- Combination electrodes in portable multi parameter testers.
The solution is intended for light cleaning between measurements and for regular maintenance. For heavy fouling, scale or oils, a
specific intensive cleaning product recommended by the probe manufacturer may still be needed.
How to use Meytec H2O electrode cleaning solution
Using Meytec H2O electrode cleaning solution is straightforward and can be integrated into the normal measuring routine. The aim is to
remove as much sample residue as possible before calibration or storage.
- Rinse the probe briefly with tap or demineralised water to remove bulk residues.
- Pour a small amount of H2O cleaning solution into a clean container.
- Immerse the sensor tip and gently move the probe to help detach remaining deposits.
- Allow a short contact time, then remove and lightly shake off the excess liquid.
- If desired, finish with a quick rinse in demineralised water before calibration.
After this cleaning step, the electrode can be placed directly into buffer solutions for calibration or into KCL storage solution, in
line with manufacturer recommendations.
Maintenance benefits and recommended frequency
Regular use of Meytec H2O electrode cleaning solution bottle 60 ml supports faster and more stable readings and helps extend probe
lifetime. Clean, residue free sensor surfaces respond more quickly to changes in water conditions and typically require fewer
adjustments during calibration.
- Reduces build up of salts and light organic films on probe surfaces.
- Supports quicker stabilisation of readings during tests.
- Limits the need for mechanical cleaning that can scratch glass bulbs.
In normal private pool use, a short cleaning cycle after each measuring session or at least several times per week is usually sufficient.
In heavy use or commercial settings, more frequent cleaning may be beneficial.
Storage and handling recommendations
To keep the Meytec H2O electrode cleaning solution bottle 60 ml in good condition, it should be stored in a cool, dry place away from
direct sunlight and heat sources. Basic handling precautions help to avoid contamination from salts, dirt and sample residues.
- Always close the bottle tightly immediately after dispensing.
- Use only clean glass or plastic containers for the working volume.
- Discard used cleaning solution and never return it to the original bottle.
With correct storage and regular use alongside suitable calibration and storage solutions, Meytec H2O electrode cleaning solution helps
keep pH, orp and conductivity probes clean, stable and ready for accurate pool and spa water measurements.
