Description
Welticolle abs plastic glue 50 ml bottle 62751
The Welticolle abs plastic glue 50 ml bottle 62751 is a dedicated adhesive for bonding abs pool fittings and accessories. It is typically used for Weltico skimmers, lids, frames and adapters where a reliable structural bond between abs components is required during assembly or renovation.
Application area and typical use
This abs plastic glue is designed for small and medium bonding jobs in and around the pool. It is suitable for constructing or repairing assemblies made from abs parts such as skimmer risers, frames, covers and certain in wall fittings. The compact 50 ml bottle is ideal for installers and service technicians who need a practical quantity for on site use.
Welticolle abs plastic glue 50 ml bottle 62751 is generally applied where mechanical fastening alone is not sufficient, or where a sealed joint between abs components is desired to improve rigidity and durability.
Bonding properties and materials
The adhesive is formulated to work specifically with abs plastics used in many pool skimmers and accessories. When applied correctly, it softens the surface slightly and creates a strong bond as the solvent evaporates and the plastics fuse together.
- Suitable for bonding compatible abs components together.
- Designed for skimmer parts, frames, raisers and small pool fittings.
- Provides a rigid, long lasting bond when surfaces are properly prepared.
The glue is not intended as a general purpose pvc pressure pipe cement and should only be used on materials indicated as abs by the manufacturer.
Preparation and application
For optimum performance, surfaces must be clean, dry and free of grease before applying Welticolle abs plastic glue 50 ml bottle 62751. Good surface preparation increases contact area and improves the quality of the final bond.
- Lightly sand the abs surfaces if required to remove gloss and improve adhesion.
- Clean the area with a suitable cleaner to remove dust and contaminants.
- Apply a thin, even layer of glue to one or both surfaces as recommended.
- Assemble the parts promptly and hold them in position to prevent movement.
The adhesive usually reaches handling strength after a short period, but final mechanical strength and resistance to load are achieved after full curing time specified by the manufacturer.
Usage in pool construction and renovation
In practical pool work, Welticolle abs plastic glue 50 ml bottle 62751 is used when installing or adjusting Weltico skimmer accessories. This includes bonding certain adapters, spacers or cosmetic elements to ensure that the assembly remains stable under normal use and exposure to water and temperature changes.
- Fixing abs riser rings and adapter pieces above the skimmer body.
- Securing trim parts or covers that require additional bonding.
- Carrying out small repairs on abs skimmer housings and frames.
The 50 ml bottle format is convenient for keeping in a service kit, providing enough adhesive for several standard repairs without excessive waste.
Safety and handling recommendations
As with most solvent based adhesives, Welticolle abs plastic glue 50 ml bottle 62751 should be used with appropriate care. Work should be performed in a well ventilated area and any manufacturer safety guidelines must be followed.
- Avoid skin and eye contact and wear suitable protection where needed.
- Keep away from sources of ignition and do not smoke during application.
- Close the bottle carefully after use to prevent evaporation and thickening.
- Store in a cool, dry place according to the product label instructions.
Correct handling not only improves safety but also helps preserve the quality of the adhesive over time, ensuring consistent bonding performance for future repair and installation jobs.
