Description
Weltico A400 elegance skimmer renovation kit anthracite 62743A
The Weltico A400 elegance skimmer renovation kit anthracite 62743A is a complete front side refurbishment set for A400 elegance skimmers. It allows you to replace the worn sealing parts and visible front elements while keeping the original in wall skimmer body, so you can refresh the waterline area without rebuilding the pool structure.
Overview and typical use
This renovation kit is designed for pools where the Weltico A400 elegance skimmer body is still mechanically sound, but the gaskets and front section have aged, discoloured or started to lose sealing performance. By renewing these components, the kit restores watertightness around the skimmer mouth and gives the skimmer face a modern anthracite finish that works well with contemporary liners and stone surrounds.
All work is carried out from the pool side, which means the renovation can usually be done together with a liner change or general refurbishment without opening the pool wall or removing the built in A400 elegance skimmer body.
Kit contents and compatibility
The Weltico A400 elegance skimmer renovation kit anthracite 62743A brings together the main front side parts required to refurbish the A400 elegance opening. Each element follows the original elegance geometry to align with the existing throat and screw pattern on compatible installations.
- New sealing elements for the A400 elegance skimmer mouth.
- Anthracite front parts to renew the visible section at the waterline.
- Mounting hardware tailored to the A400 elegance screw layout.
The kit is intended specifically for Weltico A400 elegance skimmers installed in residential pools with concrete, concrete liner, shell or panel liner structures where the in wall skimmer body is retained. It is offered as a dedicated replacement set within the spare parts assortment distributed through PoolParthub.com.
Benefits of the anthracite elegance skimmer front
Exposure to sunlight, fluctuating water levels and water treatment products gradually affects the appearance and flexibility of the original front section. With the Weltico A400 elegance skimmer renovation kit anthracite 62743A you restore both the functional sealing and the visual quality of the skimmer mouth in one intervention.
- Uniform anthracite finish that complements grey, stone or dark liners.
- Updated look that preserves the elegance design lines of the A400 skimmer.
- New sealing components to reduce the risk of small leaks at the waterline.
Sealing performance and refurbishment advantages
Sealing elements around the skimmer mouth gradually compress and harden, which can lead to seepage or damp marks at the pool wall. By replacing the ageing parts with the elements in this kit, you restore even clamping pressure around the A400 elegance throat and help secure long term watertightness at the interface with the pool finish.
- New seals compensate for loss of elasticity in the original gaskets.
- Renewed contact surfaces between the skimmer front and liner or render.
- Extended service life for the existing A400 elegance skimmer body.
Installation and practical considerations
Installation of the Weltico A400 elegance skimmer renovation kit anthracite 62743A should always be done with the filtration system stopped and the water level controlled. Typically the water is lowered just below the skimmer mouth to provide access to screws and sealing faces.
- Remove the existing front parts and old sealing elements from the A400 elegance opening.
- Clean the contact surfaces carefully to remove scale, biofilm and residues.
- Position the new sealing elements according to the A400 elegance layout.
- Fit the new anthracite front parts, aligning them precisely with the skimmer mouth.
- Tighten the screws gradually and evenly to compress the seals without distortion.
After refilling the pool to its normal level and restarting filtration, the skimmer area should be monitored to ensure that no moisture appears around the mouth and that surface skimming remains smooth and regular.
Maintenance tips after renovation
Once the Weltico A400 elegance skimmer renovation kit anthracite 62743A is installed, routine checks help maintain both the visual finish and the sealing performance over time.
- Inspect the anthracite front and screw heads periodically for movement or stress.
- Maintain balanced water chemistry to limit premature ageing of plastics and seals.
- Clean the renewed front gently with non abrasive products to protect the finish.
- Check surface skimming regularly to ensure consistent flow towards the skimmer opening.
With correct installation and seasonal maintenance, this renovation kit offers a durable cosmetic and functional upgrade for existing Weltico A400 elegance skimmers in modern residential pools.
