Description
Weltico A600 design skimmer renovation kit anthracite 64321DA
The Weltico A600 design skimmer renovation kit anthracite 64321DA is a complete front side refurbishment set for A600 design skimmers.
It allows you to renew the sealing parts and visible anthracite front elements while keeping the existing in wall skimmer body, ideal for
liner, concrete liner, shell and panel liner pools already equipped with a Weltico A600 skimmer.
Overview and typical use
This renovation kit is designed for pools where the Weltico A600 skimmer body is still structurally sound, but the gaskets, counter
flange and front cover have aged, discoloured or no longer seal correctly. By replacing these components, the kit restores watertightness
around the skimmer mouth and gives the waterline a modern anthracite finish without the need for heavy structural work on the pool wall.
All work is carried out from the pool side, so most refurbishment jobs can be completed without opening the pool shell, which makes this
kit particularly suitable during liner replacement or general pool renovation.
Kit contents and compatibility
The Weltico A600 design skimmer renovation kit anthracite 64321DA brings together the main front side elements required to refurbish the
A600 skimmer mouth area. Each part follows the original A600 design geometry so the new front aligns precisely with the existing throat
and fixing pattern.
- New sealing gaskets for the skimmer mouth and pool finish interface.
- Counter flange to clamp the liner or wall finish against the skimmer opening.
- Anthracite front cover elements matched to the A600 design shape and screw layout.
- Hardware set with screws sized for the Weltico A600 flange.
The kit is suitable for Weltico A600 design skimmers installed in concrete, concrete liner, shell and panel liner pools, provided the in
wall skimmer body is intact and uses the original A600 fixing pattern.
Benefits of the anthracite skimmer front
Exposure to sunlight, variations in water level and pool treatment products gradually affects both the look and flexibility of the
visible skimmer parts. With the Weltico A600 design skimmer renovation kit anthracite 64321DA you restore a uniform dark grey finish at
the waterline and renew the sealing between the A600 skimmer body and the pool structure.
- Anthracite front for a contemporary, low contrast look along the waterline.
- Finish that pairs well with grey liners, tiles and modern coping stones.
- Replacement front elements that preserve the original A600 hydraulic opening.
Sealing performance and refurbishment advantages
Over time, the sealing gaskets around the skimmer mouth compress and harden, which can lead to seepage or damp marks near the waterline.
By replacing the seals and counter flange, the Weltico A600 design skimmer renovation kit anthracite 64321DA restores uniform clamping
pressure and supports long term watertightness around the A600 opening.
- New gaskets compensate for ageing and loss of elasticity in the original seals.
- Counter flange distributes tightening forces evenly across the skimmer mouth.
- Assembly is tailored to the tolerances of the original Weltico A600 skimmer body.
Because the in wall A600 body remains in place, the kit provides an efficient way to extend the service life of the skimmer installation
with minimal structural work on the pool shell.
Installation and practical considerations
Installation of the Weltico A600 design skimmer renovation kit anthracite 64321DA should always be carried out with the filtration system
stopped and the water level controlled. In most cases the water surface is lowered just below the skimmer mouth to give comfortable
access to the screws and sealing surfaces.
- Remove the existing screws, front cover and old gaskets from the A600 mouth.
- Clean the skimmer throat and contact area to remove scale, dirt and residues.
- Position the new gaskets and counter flange following the A600 assembly layout.
- Fit the new anthracite front elements, aligning them carefully with the opening.
- Tighten the screws gradually in a cross pattern to compress the seals evenly.
After refilling the pool and restarting filtration, the skimmer area should be monitored to confirm that no moisture appears around the
mouth and that surface skimming remains stable and quiet.
Maintenance tips after renovation
Once the Weltico A600 design skimmer renovation kit anthracite 64321DA is installed, simple seasonal checks help preserve both the visual
aspect and the sealing performance of the renewed skimmer front.
- Inspect the anthracite front and screw heads periodically for signs of movement or stress.
- Keep water chemistry balanced to protect plastic components and gaskets.
- Clean the front gently with non abrasive products to avoid scratching the finish.
- Check surface skimming regularly to ensure free flow towards the skimmer mouth.
With correct installation and basic maintenance, this kit offers a durable functional and aesthetic upgrade for existing Weltico A600
design skimmers in contemporary residential pools.
