Description
Weltico A600 design skimmer renovation kit white 64321D
The Weltico A600 design skimmer renovation kit white 64321D is a complete front side refurbishment set for A600 design skimmers. It allows you to renew the sealing parts and visible front elements while keeping the existing in wall skimmer body, ideal for liner, concrete liner, shell and panel liner pools already equipped with a Weltico A600 skimmer.
Overview and typical use
This renovation kit is intended for pools where the Weltico A600 skimmer body is still structurally sound, but the gaskets, counter flange and front cover have aged, discoloured or no longer seal correctly. By replacing these components, the kit restores watertightness around the skimmer mouth and gives the waterline a clean white finish without having to remove the built in skimmer.
All work is carried out from the pool side, so most refurbishment jobs can be completed without opening the pool wall. Within the spare parts range available on PoolParthub.com this kit is a practical choice during liner replacement or when renovating an existing residential pool.
Kit contents and compatibility
The Weltico A600 design skimmer renovation kit white 64321D brings together the main front side parts required to refurbish the A600 skimmer mouth area. Every element follows the original A600 design geometry for a precise fit on compatible installations.
- New sealing gaskets for the skimmer mouth and pool finish interface.
- Counter flange to clamp the liner or wall finish against the skimmer opening.
- White front cover elements matched to the A600 design shape and screw pattern.
- Hardware set with screws sized for the A600 flange layout.
The kit is suitable for Weltico A600 design skimmers installed in concrete, concrete liner, shell and panel liner pools, provided the in wall skimmer body is intact and uses the original A600 fixing pattern.
Benefits of the white skimmer front
Exposure to sunlight, waterline deposits and pool treatment products gradually affects both the look and flexibility of the visible skimmer parts. With the Weltico A600 design skimmer renovation kit white 64321D you restore a uniform white finish at the waterline and renew the sealing between the A600 skimmer body and the pool structure.
- Neutral white front that blends with most liners and coping styles.
- Refreshed appearance around the skimmer mouth and waterline area.
- Replacement front parts that preserve the original A600 hydraulic opening.
Sealing performance and refurbishment advantages
Over time, the sealing gaskets around the skimmer mouth compress and harden, which can lead to seepage or damp marks near the waterline. By replacing the seals and counter flange, the Weltico A600 design skimmer renovation kit white 64321D restores uniform clamping pressure and helps ensure long term watertightness around the A600 opening.
- New gaskets compensate for ageing and loss of elasticity in the original seals.
- Counter flange distributes tightening forces evenly across the skimmer mouth.
- Assembly tailored to the tolerances of the original Weltico A600 skimmer body.
Because the in wall A600 body remains in place, the kit provides an efficient way to extend the life of the skimmer installation with minimal structural work on the pool shell.
Installation and practical considerations
Installation of the Weltico A600 design skimmer renovation kit white 64321D should always be carried out with the filtration system stopped and the water level controlled. In most cases the water surface is lowered just below the skimmer mouth to give comfortable access to the screws and sealing surfaces.
- Remove the existing screws, front cover and old gaskets from the A600 mouth.
- Clean the skimmer throat and contact area to remove scale, dirt and residues.
- Position the new gaskets and counter flange following the A600 assembly layout.
- Fit the new white front elements, aligning them carefully with the opening.
- Tighten the screws gradually in a cross pattern to compress the seals evenly.
After refilling the pool and restarting filtration, the skimmer area should be monitored to confirm that no moisture appears around the mouth and that surface skimming remains stable and quiet.
Maintenance tips after renovation
Once the Weltico A600 design skimmer renovation kit white 64321D is installed, simple seasonal checks help preserve both the visual aspect and the sealing performance of the renewed skimmer front.
- Inspect the white front and screw heads periodically for movement or stress.
- Keep water chemistry balanced to protect gaskets and plastic components.
- Clean the front gently with non abrasive products to avoid scratching the finish.
- Check surface skimming regularly to ensure free flow towards the skimmer mouth.
With correct installation and basic maintenance, this kit offers a durable functional and aesthetic upgrade for existing Weltico A600 design skimmers in a wide range of residential pool projects.
