Description
Weltico A400 design skimmer renovation kit white 60660
The Weltico A400 design skimmer renovation kit white 60660 is a complete front side refurbishment set for A400 design skimmers. It allows
you to renew the sealing parts and visible front elements of the skimmer while keeping the existing in wall skimmer body, ideal for liner,
concrete liner, shell and panel liner pools already equipped with a Weltico A400 design skimmer.
Overview and typical use
This renovation kit is intended for pools where the Weltico A400 skimmer body remains structurally sound, but the gaskets, counter flange
and front elements have aged or discoloured. By renewing these parts, the kit restores both watertightness around the skimmer mouth and a
clean white finish at the waterline, without having to replace the built in skimmer.
All work is performed from the pool side, so most refurbishment jobs can be carried out without breaking the pool wall or undertaking
heavy masonry work.
Kit contents and compatibility
The Weltico A400 design skimmer renovation kit white 60660 includes the key front side components needed to refurbish the A400 mouth area.
Every element is dimensioned for the 200 x 400 millimetre A400 opening and is designed to work with A400 design skimmers installed on
different pool structures.
- New sealing gaskets for the skimmer mouth and liner or wall interface.
- Counter flange to clamp the liner or finish against the skimmer opening.
- White front elements matching the original A400 design aesthetics.
- Hardware set with screws suited to the A400 flange layout.
The kit is suitable for A400 design skimmers installed in concrete, concrete liner, shell and panel liner pools, as the parts are shaped
to match the A400 throat regardless of structure type.
Benefits of renovating the A400 skimmer front
Over time, exposure to sunlight, waterline deposits and chemicals can discolour or weaken the visible parts and gaskets on the skimmer
mouth. The Weltico A400 design skimmer renovation kit white 60660 helps restore a clean, uniform appearance at the waterline while
renewing the sealing between the skimmer body and the pool finish.
- Fresh white components for a clean, neutral appearance around the skimmer.
- New seals to improve watertight contact with the liner or wall finish.
- Refurbishment from the pool side without removing the in wall skimmer body.
Sealing performance and refurbishment advantages
Gaskets around the skimmer mouth gradually compress and harden, which can create micro leaks or damp marks near the waterline. By
replacing these seals and the counter flange, the renovation kit restores correct clamping pressure and improves long term watertightness
around the A400 skimmer opening.
- New seals compensate for ageing and loss of elasticity of old gaskets.
- Counter flange distributes tightening forces evenly around the 200 x 400 opening.
- Optimised assembly for reliable sealing on compatible A400 design skimmers.
Because the original A400 body stays in place, the kit offers an efficient way to extend the service life of an existing skimmer
installation with limited structural intervention.
Installation and practical considerations
Installation of the Weltico A400 design skimmer renovation kit white 60660 should always be done with filtration stopped and the water
level controlled. In many cases the water is lowered slightly below the skimmer mouth to provide comfortable access to screws and sealing
surfaces.
- Remove the existing screws, front parts and old gaskets from the A400 mouth.
- Clean the skimmer throat and liner or wall contact area to remove scale and debris.
- Position the new gaskets and counter flange following the A400 assembly layout.
- Install the new white front elements, aligning them carefully with the opening.
- Tighten the screws gradually in a cross pattern to compress the seals without deforming the plastic.
After refilling the pool to its normal level and restarting filtration, the skimmer area should be checked to ensure that no moisture
appears around the mouth and that surface skimming remains smooth and quiet.
Maintenance tips after renovation
Once the Weltico A400 design skimmer renovation kit white 60660 is installed, simple seasonal checks help maintain both the appearance
and the sealing performance of the renewed skimmer front.
- Inspect the white front parts and screw heads periodically for signs of stress or movement.
- Maintain balanced water chemistry to protect gaskets and plastic components.
- Clean the front gently to avoid scratching or dulling the white surfaces.
- Check surface skimming regularly to confirm that the waterline flows freely into the skimmer.
With correct installation and basic maintenance, this kit provides a durable visual and functional refresh for existing Weltico A400
design skimmers in a wide range of residential pool configurations.
