Description
Weltico A400 design pool skimmer renovation kit sand 60662S
The Weltico A400 design pool skimmer renovation kit sand 60662S is a complete front side refurbishment set for A400 design skimmers. It
lets you renew the sealing parts and the visible mouth area while keeping the existing skimmer body in place, ideal for liner, concrete
liner, shell and panel liner pools already equipped with an A400 design skimmer.
Overview and typical use
This renovation kit is intended for pools where the Weltico A400 skimmer body is still structurally sound, but the gaskets, counter
flange and mouth appearance need to be refreshed. The sand coloured mouth faceplate clips onto the existing opening, while the new seals
and counter flange restore watertightness around the skimmer throat and secure the liner or wall finish.
All work is carried out from the pool side, so you can modernise the look of the skimmer and renew sealing without removing the in wall
A400 skimmer body or opening the surrounding structure.
Kit contents and compatibility
The Weltico A400 design pool skimmer renovation kit sand 60662S includes all front side components required to refurbish the A400 mouth
area. Each part is dimensioned for the 200 x 400 millimetre A400 opening and is compatible with A400 design skimmers installed on
different pool structures.
- Two sealing gaskets for the skimmer mouth and liner or wall interface.
- Counter flange to clamp the finish securely against the skimmer opening.
- Sand colour clip on mouth faceplate for the A400 design skimmer.
- New skimmer flap matched to the A400 throat for efficient surface skimming.
- Complete hardware set with screws for assembly.
The kit is suitable for A400 design skimmers in concrete, concrete liner, shell and panel liner pools, since the sand coloured mouth
faceplate clips directly onto the existing A400 front regardless of the wall structure.
Benefits of the sand colour mouth faceplate
The sand colour mouth faceplate gives the skimmer a warm, discreet look that blends very well with beige or sand liners, stone coping and
natural style terraces. It creates a clean transition between the pool wall finish and the skimmer throat while preserving the original
A400 hydraulics.
- Sand coloured front for a soft, natural appearance around the skimmer.
- Clip on design allows colour change or renewal without replacing the body.
- Precisely shaped for the A400 design throat, flap and screw positions.
Sealing performance and renovation advantages
Over time, skimmer gaskets flatten and harden, which can cause small leaks between the liner and the skimmer body. The Weltico A400
design pool skimmer renovation kit sand 60662S supplies new seals, a new counter flange and new hardware to restore uniform clamping
pressure and watertightness around the mouth.
- New gaskets replace aged seals and improve contact with the liner or finish.
- Counter flange spreads tightening force evenly over the full opening.
- New flap supports quiet, effective surface skimming at normal water levels.
Because the renovation is performed from inside the pool, structural work is reduced to a minimum and most refurbishments can be carried
out without heavy demolition or masonry.
Installation and practical considerations
Installation of the Weltico A400 design pool skimmer renovation kit sand 60662S should always be done with filtration stopped and the
water level controlled. In many cases the water surface is lowered slightly below the skimmer mouth to provide comfortable access to
screws and sealing surfaces.
- Remove the existing screws, counter flange, flap and old gaskets from the A400 mouth.
- Clean the skimmer throat and liner or wall contact area to remove scale and debris.
- Position the new gaskets and counter flange following the A400 assembly layout.
- Install the new flap and clip the sand coloured mouth faceplate onto the skimmer front.
- Tighten the screws gradually in a cross pattern to compress the seals without deforming the plastic.
Once the pool is refilled to its normal level and filtration is restarted, the skimmer area should be inspected to check that no moisture
appears around the mouth and that the flap moves freely with changes in water level.
Maintenance tips for long lasting results
After the renovation, simple seasonal checks help keep the Weltico A400 design pool skimmer renovation kit sand 60662S performing and
looking good over many years.
- Inspect the sand colour faceplate and screw heads periodically for movement or stress.
- Maintain balanced water chemistry to protect gaskets and plastic components.
- Clean the mouth faceplate gently to avoid scratches or discolouration.
- Check flap movement regularly to ensure free, efficient surface skimming.
With correct installation and basic maintenance, this kit offers a durable visual and functional upgrade for existing Weltico A400 design
skimmers, especially in pools with beige or natural style finishes.
