Description
Zodiac female AUS format power socket R0741300
The Zodiac female AUS format power socket R0741300 is the original replacement connector used on Zodiac salt chlorinators to accept the male AUS style power plug. It ensures a secure electrical connection between the power lead and the control unit, maintaining safe and reliable operation of the chlorinator.
Main features of the Zodiac female AUS power socket
- Original Zodiac AUS format female socket for salt chlorinators.
- Provides a secure connection point for the matching AUS male plug.
- Designed for low voltage power connections in pool chlorination systems.
- Factory part with correct geometry and contacts for compatible control units.
Compatibility with Zodiac chlorinators
The R0741300 female AUS socket is used on several Zodiac salt water chlorination systems and mineral pool units. It is listed in exploded views and spare parts catalogues as “enchufe hembra formato AUS” with reference R0741300. [oai_citation:0‡piscinamarket.com](https://www.piscinamarket.com/product/enchufe-hembra-formato-aus-zodiac-tri-tri-expert-hydroxinator/?utm_source=chatgpt.com)
- Zodiac Tri salt chlorinators (Tri 10, 18, 22 and 35).
- Zodiac Tri Expert 10, 18, 22 and 35.
- Zodiac Tri Expert LS 10 and 18.
- Zodiac Hydroxinator Magnapool models that use the AUS format power connection. [oai_citation:1‡piscinasdelestrecho.com](https://piscinasdelestrecho.com/recambios-cloradores-zodiac-tri/2443-recambio-clorador-zodiac-soporte-fijacion-pared-con-kit.html?utm_source=chatgpt.com)
If the spare parts list for your unit specifies R0741300 female AUS plug, or the original socket on the control box is labelled with this reference, this connector is the correct replacement.
Typical reasons for replacement
With time, repeated connection and disconnection of the AUS power plug, combined with heat and humidity in the technical room, can wear the contacts or housing of the socket.
- Loose connection or intermittent power when moving the power cable.
- Visible burn marks, discoloration or deformation around the socket.
- Difficulty inserting or removing the male plug due to worn guides.
- Mechanical damage to the socket body from impact or incorrect handling.
Installation guidelines
Replacing the Zodiac female AUS format power socket should be done with the control unit completely disconnected from the mains supply. If you are not familiar with electrical work, the replacement should be carried out by a qualified technician.
- Disconnect the mains power and verify that the control box is completely de energised.
- Open the control unit housing according to the manufacturer instructions.
- Note the wiring and fixing method of the existing R0741300 socket before removal.
- Disconnect the internal wires and release the old socket from its mounting position.
- Install the new Zodiac female AUS socket in the same orientation and fix it securely.
- Reconnect the wires to the terminals as originally configured, ensuring firm, clean contacts.
- Reassemble the housing, reconnect the power and test that the male AUS plug fits correctly and that the unit powers up without faults.
Correctly installed, the Zodiac female AUS format power socket R0741300 restores a safe and stable connection point for the AUS power lead and helps maintain reliable service from your Zodiac Tri, Tri Expert or Hydroxinator system.
