Description
Zodiac cell power cable fixing clip R0768100
The Zodiac cell power cable fixing clip R0768100 is the original plastic clamp used to secure the low voltage cell power cable on Zodiac salt chlorinators.
It holds the cable firmly in place near the control box or cell connection, providing strain relief and preventing the lead from moving, rubbing or pulling
on the electrical connectors during normal use.
Main features of the Zodiac fixing clip
- Original Zodiac fixing clip for the cell power supply cable on selected salt chlorinators.
- Designed to guide and secure the cable so that it follows a safe, controlled path.
- Helps to protect the cell and control box connectors against mechanical stress and vibration.
- Compact, unobtrusive design that fits neatly in the technical room around existing equipment.
- Manufactured from pool compatible plastic suitable for humid technical environments.
Compatibility and typical applications
The R0768100 clip is used on several Zodiac salt chlorinators to fix the electrolytic cell power cable along the housing or mounting bracket.
It appears in the spare parts diagrams as the “cell power cable fixing clip” and works together with the complete power cable and wall mounting support.
- Suitable for Zodiac Ei salt chlorinators using the standard cell power cable.
- Used on Zodiac Tri and Tri Expert control units where the cell cable exits the housing.
- Compatible with Zodiac Hydroxinator and Hydroxinator MagnaPool models that share the same cable routing.
- Recommended whenever the original clip is missing, cracked or no longer holds the cable securely.
To confirm compatibility, check the exploded view or parts list for your chlorinator. If it lists R0768100 as the cable fixing clip for the cell power
supply lead, this spare part is the correct replacement.
Why the cable fixing clip is important
Although small, the fixing clip has an important protective function. The cell power cable carries low voltage but relatively high current to the electrode.
If the cable hangs freely or is pinched against other equipment, it can be damaged over time, leading to poor contacts, error messages or even overheating
at the connectors.
- Keeps the cable in a defined position, away from sharp edges and moving parts.
- Reduces strain on the plugs when the cell is handled during cleaning or replacement.
- Helps maintain a tidy layout inside the technical room, with clear cable routing.
- Supports long term reliability of the chlorinator by limiting cable fatigue.
When to replace the Zodiac R0768100 fixing clip
The clip can become brittle or deformed after years of exposure to heat, humidity and accidental knocks in the technical area.
A damaged or missing clip no longer supports the cable correctly and should be replaced.
- The clip is visibly cracked, bent or no longer grips the cable firmly.
- The power cable can move freely or rub against the edge of the control box or wall bracket.
- Temporary ties or non original clamps have been added to hold the cable in place.
- The original clip has been lost during previous maintenance or relocation of the unit.
Fitting a new Zodiac R0768100 clip restores the intended cable routing and strain relief designed by the manufacturer, helping to protect
the power connection to the cell.
Installation guidelines
Installing the cable fixing clip is a simple mechanical operation that can usually be done at the same time as other maintenance on the chlorinator.
- Switch off the power supply to the chlorinator before working near the control box or cable.
- Identify the original mounting point for the clip on the housing or bracket, using the parts diagram as a reference.
- Remove any remains of the old clip and clean the area so the new part sits flat and secure.
- Position the new R0768100 clip and engage it in its fixing point, following the orientation of the original piece.
- Place the cell power cable into the clip so that it is held firmly but without crushing the insulation.
- Check that the cable runs in a smooth curve between the control box and cell, with no tight bends or twists.
Once fitted, the clip should hold the cable securely while still allowing enough slack for normal movement during cell cleaning or replacement.
Maintenance and good practice
Even though the fixing clip itself needs little maintenance, regular visual checks of the technical room help to detect damage early and keep the
chlorination system running reliably.
- Inspect the clip and cable at the start of each season and after any significant work in the technical area.
- Avoid hanging tools, hoses or other cables from the cell power cable or the fixing clip.
- Ensure that the cable is not trapped when opening or closing doors, covers or wall mounted equipment.
- Replace the clip immediately if it no longer holds the cable in the designed position.
With an intact Zodiac cell power cable fixing clip R0768100 and correctly routed cable, the electrical connection between the control box and cell
remains well protected, supporting safe and stable salt chlorination.
