Description
PoolLab 1.0 digital pool tester
The PoolLab 1.0 digital pool tester is a compact triple wavelength photometer for accurate water analysis in private pools and spas.
With its built in, exchangeable cuvette and waterproof housing, you simply dip the tester into the water, add a reagent tablet and read a precise digital value
for the most important water parameters such as pH and chlorine. Combined with the free PoolLab app and cloud, it gives you full insight into water quality
and dosage recommendations on your smartphone or computer.
Main features of the PoolLab 1.0 digital pool tester
- Triple wavelength photometer designed for professional level water analysis in private pools and spas.
- Measures multiple parameters including pH, free, combined and total chlorine, alkalinity, cyanuric acid and more.
- Built in but exchangeable cuvette for quick water sampling by simply dipping the IP68 waterproof tester into the pool.
- Six direct access buttons for fast selection of the most common test parameters.
- Bluetooth 4.0 connectivity with free PoolLab software, app and cloud for data logging and dosage advice.
- Powered by standard AAA batteries for mobile use around the pool or in the technical room.
Water parameters and measurement ranges
Depending on configuration and reagents, the PoolLab 1.0 can measure a wide range of pool parameters. [oai_citation:0‡Letslab Delivering Solutions, SLU](https://www.letslab.com/poollab-1-0-photometer.lab?utm_source=chatgpt.com)
- pH: 6.5 to 8.4 pH.
- Chlorine: free, combined and total chlorine typically 0.00 to 6.00–8.00 mg/l (ppm).
- Alkalinity (acid capacity): around 0 to 200–300 mg/l (ppm) CaCO₃.
- Cyanuric acid (stabiliser): around 0 to 160 mg/l (ppm).
- Active oxygen (MPS): up to about 30 mg/l (ppm).
- Bromine: roughly 0 to 13.5 mg/l (ppm).
- Chlorine dioxide: roughly 0 to 11.4 mg/l (ppm).
- Ozone: roughly 0 to 4.0 mg/l (ppm).
- Hydrogen peroxide: low range around 0.0 to 2.9 mg/l (ppm), optional higher range with specific reagents.
- Total and calcium hardness: up to about 500 mg/l (ppm) with the appropriate tablets.
Additional parameters such as urea and PHMB can be added by using the corresponding PoolLab reagents and methods.
Kit contents and included accessories
The standard PoolLab 1.0 digital pool tester kit includes everything you need to start testing immediately. [oai_citation:1‡Quimipool](https://www.quimipool.com/en/10188-poollab-photometer-10.html?srsltid=AfmBOoqKVGLjfB8S0UQGimKt6f76H-3O-E2YDU5l51JXxwkFlNfeIX_p&utm_source=chatgpt.com)
- PoolLab 1.0 photometer with IP68 waterproof housing and built in cuvette.
- Light shield for reliable readings in bright sunlight.
- Plastic stirring rod for dissolving reagent tablets.
- Three AAA batteries.
- Initial reagent pack:
- 20 tablets DPD no. 1 (free chlorine).
- 10 tablets DPD no. 3 (combined or total chlorine).
- 20 tablets phenol red (pH).
- 10 tablets alkalinity M (alkalinity or acid capacity).
- 10 tablets CYA test (cyanuric acid or stabiliser).
- Printed user manual.
- Free access to PoolLab app, PC software and cloud for result management.
Operation, app connection and data management
The PoolLab 1.0 has six direct buttons that provide instant access to frequently used tests such as pH and free chlorine.
You fill the cuvette with pool water, add the appropriate tablet, dissolve it using the stirring rod and then press the selected parameter key to obtain a digital result.
Thanks to Bluetooth 4.0, measurements can be synchronised with the PoolLab app and cloud. [oai_citation:2‡Pool.shop](https://www.pool.shop/p/poollab-1-0-digital-swimming-pool-tester/?srsltid=AfmBOooXrxmrEjlpyVVkcIJrqesa2NSSEyvCDqkDhr5oVJedPP9dI6ri&utm_source=chatgpt.com)
This allows you to:
- Store and track test results over time for one or multiple pools.
- Receive dosage recommendations based on entered treatment products and measured values.
- Calculate indices such as the Langelier saturation index (LSI) where supported.
- Export or print reports for maintenance documentation or professional use.
Installation and practical use
- Rinse the cuvette with pool water before each measurement to avoid contamination.
- Always use photometer grade tablets, never rapid tablets, to ensure accurate readings.
- Do not touch reagent tablets with bare fingers; use the foil or blister to drop them into the cuvette.
- Hold the light shield over the cuvette in bright sunlight to minimise stray light.
- After testing, rinse the cuvette and device with clean water and dry gently.
The compact design and battery power make it easy to use the PoolLab 1.0 directly at the pool, in the plant room or even at different locations if you manage several pools.
Who is the PoolLab 1.0 best suited for
- Private pool and spa owners who want more precise control than simple test strips can offer.
- Service technicians or caretakers who maintain several small pools and need documented test results.
- Holiday homes, small hotels and wellness centres that want digital water analysis without a complex laboratory.
With its combination of multi parameter measurements, waterproof housing and app connectivity, the PoolLab 1.0 digital pool tester offers a practical,
professional style solution for everyday pool water analysis.
