Fluidra - Filter Tank Lid with Gasket for Europe Filter Ø1050 mm

Fluidra – Filter Tank Lid with Gasket for Europe Filter Ø1050 mm

This is the genuine Fluidra replacement filter lid and gasket kit for the Europe Filter with a Ø1050 mm tank diameter. The lid seals the top opening of the filter vessel, providing secure, pressure-tight access for media inspection, sand changes, and internal servicing. The included gasket ensures a leak-free seal under normal operating pressures of up to 2.5 kg/cm² (approx. 2.5 bar).

Compatibility

This lid and gasket assembly is designed exclusively for the Fluidra Europe Filter Ø1050 mm, 75 mm connection, 1.0 m filter bed, rated to 2.5 kg/cm². It is not compatible with other Europe Filter diameters (e.g. Ø1200, Ø1400) or other Fluidra filter ranges. Always verify your filter’s model and tank diameter before ordering.

Why Genuine Matters

As an OEM Fluidra part, this lid is manufactured to the exact dimensional tolerances and pressure ratings of the original filter vessel. A genuine gasket ensures the correct compression profile for a reliable seal, reducing the risk of leaks or pressure loss that can occur with aftermarket alternatives. Using genuine parts also helps preserve any applicable warranty on your filter system.

Installation

Remove system pressure and isolate the filter before servicing. Lift off the old lid, clean the seating surface thoroughly, fit the new gasket without twisting, and secure the lid according to the torque guidance in your Europe Filter manual. Installation on a large commercial filter of this size is best carried out by a qualified pool technician.