Fluidra - Manifold Arm Assembly 1" for Europe Filter Ø2000

Fluidra – Manifold Arm Assembly 1″ for Europe Filter Ø2000

This is a genuine Fluidra replacement manifold arm assembly with a 1″ connection, designed for the Fluidra Europe Filter with a Ø2000 mm tank diameter and 140 mm pipe connections. The manifold arm forms part of the internal collector system inside the filter tank, evenly distributing water across the sand bed during filtration and channelling filtered water back out during backwash cycles. Replacing a cracked or worn arm restores full filtration efficiency and protects the sand bed from channelling.

Compatibility

This manifold arm assembly is a direct OEM spare part for the Fluidra Europe Filter Ø2000–140 mm, 1.0 m filter bed, rated at 2.5 kg/cm² (2.5 bar). It is designed specifically for the Ø2000 mm model in the Europe Filter commercial sand filter range and may not be interchangeable with other tank diameters or arm connection sizes in the same series. Always verify the tank diameter, connection size, and arm thread before ordering.

Why Genuine Matters

Genuine Fluidra parts are manufactured to the exact dimensional and material tolerances of the original assembly, ensuring a secure, leak-free fit within the manifold hub. Third-party arms can vary in slot dimensions, thread pitch, and arm length, leading to uneven flow distribution, sand bypass, or premature failure — issues that can be costly to diagnose in a large commercial filter installation.

Installation

The manifold arm threads directly into the central manifold hub at the base of the filter tank. Ensure the filter is fully depressurised, drained, and the sand media removed before access. Replacement requires entry through the filter’s inspection port; on the Ø2000 Europe Filter this is a 400 mm lid opening. Professional installation by a qualified pool technician is strongly recommended for commercial-scale filters of this size.