Fluidra - Drain Plug with Gasket 3/4" – 1/4" for Delta Filter

Fluidra – Drain Plug with Gasket 3/4″ – 1/4″ for Delta Filter

This is the genuine Fluidra replacement drain plug and gasket set, sized 3/4″ with a 1/4″ secondary port, designed for the Fluidra (AstralPool) Delta Filter 1000-1200 series in Ø1000 and Ø1200 mm tank configurations. The plug seals an outlet or drain connection on the filter tank, while the included gasket ensures a watertight, pressure-rated seal. It is an essential consumable for routine maintenance, filter servicing, or any time a plug or its seal shows wear or leakage.

Compatibility

This plug and gasket is a specified spare part for the Fluidra Delta Filter 1000-1200 range in the larger Ø1000 mm and Ø1200 mm diameter variants. The Delta Filter series is a high-performance laminated sand filter built in polyester and fibreglass, available in 650, 800, 1000 and 1200 mm diameters, and used in demanding commercial and public pool filtration installations. Always cross-reference your filter’s model number and exploded parts diagram before ordering to confirm fitment.

Why Genuine Matters

Genuine Fluidra parts are manufactured to the exact tolerances of the original equipment, ensuring correct thread engagement and a reliable seal under the filter’s rated operating pressure. The Delta Filter range operates at up to 250 kPa (2.5 bar), so an ill-fitting or substandard plug risks leaks or pressure loss. Using an OEM replacement also preserves any applicable warranty on the filter assembly.

Installation

Installation involves removing the old or damaged plug, cleaning the threaded port, fitting the new gasket, and hand-tightening before applying a final quarter-turn with a suitable wrench. Always depressurise and isolate the filter from the circulation system before beginning any maintenance work. For commercial installations, it is advisable to have a qualified pool technician carry out the replacement.