Fluidra - Manifold Collector Assembly for Delta Filter Ø1000–1200 mm

Fluidra – Manifold Collector Assembly for Delta Filter Ø1000–1200 mm

This is the genuine Fluidra replacement manifold collector assembly designed for the Delta Filter 1000–1200 series, covering tank diameters of Ø1000 mm and Ø1200 mm. The manifold sits at the base of the filter tank and distributes backwash water evenly while collecting filtered water through its lateral arms, ensuring efficient sand-bed filtration throughout the filter’s service life.

Compatibility

This assembly is a direct OEM replacement for the Fluidra Delta Filter 1000–1200 range (models 36678, 36679, 36682, 36683), which are high-performance laminated polyester and fibreglass commercial sand filters available in Ø1000 mm and Ø1200 mm tank diameters. Always verify your filter’s model number before ordering to ensure a correct fit — this assembly is not suitable for smaller Delta Filter variants (Ø650 mm or Ø800 mm).

Why Genuine Matters

The Delta Filter series is rated to a maximum working pressure of 2.5 bar and must comply with filtration standard EN 16713-1. Using a genuine Fluidra manifold assembly ensures the collector arms maintain the precise slot dimensions and flow geometry required for correct filtration velocity and effective backwashing, protecting both filter performance and warranty. Aftermarket parts risk compromising the hydraulic balance across the sand bed.

Installation

The manifold assembly is accessed via the DN 400 bolt-down lid fitted to the Ø1000 and Ø1200 mm Delta Filter models. Installation involves depressurising the filter, removing the sand charge, extracting the old assembly, and fitting the new unit before recharging with filter sand. Professional installation by a qualified pool technician is strongly recommended given the scale and working pressure of this commercial filter.