Fluidra - Sand Filter Base Ø750 mm – Europa Pro

Fluidra – Sand Filter Base Ø750 mm – Europa Pro

This is the genuine Fluidra replacement base for the Europa Pro sand filter with a 750 mm tank diameter. The base is the structural lower section of the filter vessel, providing a stable, level footing for the tank and housing the lower connections that channel filtered water away from the sand bed. Replacing a cracked or damaged base restores the structural integrity and watertight performance of the entire filter assembly.

Compatibility

This base is designed exclusively for the Fluidra Europa Pro sand filter range in the T, G, and M valve configurations with a 750 mm vessel diameter. The Europa Pro series is one of the most widely installed sand filter ranges across European pool installations, so always verify your filter’s diameter and model code before ordering to ensure a correct fit.

Why genuine matters

As a genuine Fluidra OEM part, this base is manufactured to the exact tolerances of the original component, ensuring proper alignment with the filter tank, correct sealing surfaces, and full pressure rating compliance. Aftermarket alternatives may not match these critical dimensions, risking leaks or premature failure under operating pressures of up to 2.5 bar.

Installation

The base should be installed by a qualified pool technician. Always fully depressurise and drain the filter before beginning work. Inspect the sealing surfaces for debris or damage before reassembly, and ensure all connections are tightened correctly to prevent leaks on return to service.