Fluidra - Upper Probe Port Plug for Elite Connect CellGuard pH 12 Cell

Fluidra – Upper Probe Port Plug for Elite Connect CellGuard pH 12 Cell

This is the genuine Fluidra blanking plug designed to seal the upper probe port on the Elite Connect CellGuard pH 12 salt electrolysis cell. It closes off the probe housing when a pH or ORP sensor is not installed in that position, preventing water ingress and maintaining system integrity under operating pressure.

Compatibility

This plug is a direct spare part for the Fluidra Elite Connect CellGuard pH 12 electrolysis cell — a smart, connected salt chlorinator producing 12 g/h of chlorine and suited to pools up to 50 m³. The CellGuard cell body features probe ports to accommodate optional pH and ORP sensors; this plug is used to seal the upper port when that sensor position is left unpopulated. Always verify your cell model and port position before ordering.

Why Genuine Matters

Using an authentic Fluidra replacement plug ensures a precise fit to the cell’s probe housing thread and reliable resistance to pool water chemistry and operating pressure (up to 1 kg/cm²). A correct seal prevents leaks that could compromise water treatment performance and damage surrounding equipment. Genuine parts also maintain any applicable warranty on the parent assembly.

Installation

Turn off and depressurise the system before removing or fitting the plug. Screw the plug finger-tight into the upper probe housing on the cell body, ensuring any associated O-ring is correctly seated to achieve a watertight seal. If in doubt, consult the Elite Connect CellGuard installation manual or engage a qualified pool technician.