Zodiac - Compressor Z200 11 kW R32 - R08511

Zodiac – Compressor Z200 11 kW R32 – R08511

The Zodiac R08511 is a replacement compressor designed for the Zodiac Z200 heat pump range, rated at 11 kW and operating with R32 refrigerant. The compressor is the core component of any heat pump, responsible for pressurising the refrigerant gas and driving the thermodynamic cycle that transfers heat energy from the ambient air into your pool water. When this component fails or degrades, the heat pump loses its ability to heat effectively, making a like-for-like replacement essential for restoring full performance.

R32 is a next-generation, low-GWP (Global Warming Potential) refrigerant that offers improved energy efficiency compared to older refrigerants such as R410A. Its higher energy density means the heat pump can deliver more thermal output per unit of refrigerant used, contributing to lower running costs and a reduced environmental footprint. The use of R32 also aligns with current European F-Gas regulations, making this compressor a compliant and future-ready choice for ongoing pool heating installations.

Technical characteristics and compatibility

This compressor is engineered specifically for the Zodiac Z200 heat pump series and carries the manufacturer part number R08511. It is rated at 11 kW, which corresponds to the thermal output capacity of the Z200 model it supports. As a factory-matched spare part, it is designed to integrate directly into the existing refrigerant circuit without modification, preserving the original performance envelope and safety certifications of the heat pump unit.

Because R32 operates at higher pressures than some legacy refrigerants and has specific handling requirements, installation and replacement of this compressor must be carried out by a qualified refrigeration engineer holding the appropriate F-Gas certification. This is not a DIY component — it is a professional-grade spare part intended for trained service technicians performing authorised repairs on Zodiac Z200 heat pumps.

Suitability and application

This replacement compressor is intended exclusively for use within the Zodiac Z200 heat pump equipped with R32 refrigerant. It is not a universal compressor and should not be fitted to other heat pump brands or models. It is suited to residential and light commercial pool installations where the Z200 unit is already deployed, and where the original compressor has reached end of service life or has developed a fault requiring full replacement. If you are unsure whether this part matches your specific Z200 variant, it is strongly recommended to verify the refrigerant type and model designation on your unit’s data plate before ordering.