Rated to a robust 64 bar working pressure and covering a temperature range of \u221210 \u00b0C to 150 \u00b0C, this 2″ Profec ball valve is built for demanding pool plant rooms, heat-pump circuits, and commercial water-treatment installations where plastic valves simply are not adequate. The grade 316 stainless steel body offers superior corrosion resistance in chlorinated and salt-water environments, making it a dependable long-term choice for both indoor and outdoor pool plant installations.<\/p>\n
A simple 90\u00b0 turn of the blue-identified stainless steel lever moves the valve from fully open to fully closed, giving instant, positive flow shut-off without the need for special tools. The lever colour-coding aids rapid identification in complex pipe runs, while the lever design keeps operating torque low even at elevated line pressures.<\/p>\n
PTFE seat seals provide excellent chemical resistance and a bubble-tight shut-off across the full operating temperature range, making the valve well suited to salt-water systems, chemical dosing lines, and heat-pump refrigerant-side ancillary water circuits. The two-piece body format simplifies in-line inspection and re-packing without full removal from the pipework.<\/p>\n
Both ports are 2″ female threaded (DN50 bore, 50 mm outer diameter) with identical face dimensions on each side, allowing the valve to be fitted directly to standard 2″ male-threaded pipe or pump flanges. The installed length of 120.5 mm (Lb) and an overall handle radius of 187 mm should be factored into plant-room clearance planning before installation.<\/p>","protected":false},"excerpt":{"rendered":"