Rain Bird LSP-1 Protector de supratensiune cu 2 fire M98999 D16350
Rain Bird LSP-1 Line Surge Protector for 2-Wire Irrigation Systems
The Rain Bird LSP-1 is a dedicated surge protection device engineered for 2-wire decoder-based irrigation systems. Voltage spikes caused by lightning strikes or power transients can travel along the 2-wire path and destroy decoders, controllers, and solenoids in seconds. The LSP-1 clamps and diverts those surges safely to ground before they reach sensitive system components, reducing costly field repairs and unplanned downtime.
Installation is straightforward: the blue wire connects in-line on the 2-wire communication path, while the yellow/green wire terminates at a clean earth ground point. The robust yellow canister body is sealed against moisture ingress, making it suitable for direct burial or weatherproof enclosure mounting. The product carries CE certification and is manufactured in Denmark to Rain Bird’s quality standards.
Specificații
- Model: LSP-1
- Part numbers: M98999 / D16350
- Product code: 01MY07
- Type: Line surge protector (MOV-based transient suppressor)
- Compatible wiring: 2-wire decoder irrigation systems
- Blue wire: connects to 2-wire line
- Yellow/Green wire: connects to earth ground
- Housing colour: Yellow
- Certification: CE
- Country of manufacture: Denmark
Compatibilitate
The LSP-1 is designed for use with Rain Bird 2-wire decoder irrigation systems, including controllers and field decoders that operate over a shared 2-wire communication bus. It should be installed at the point where the 2-wire cable enters or exits a controller cabinet, at field junction points, or anywhere the cable run is exposed to elevated lightning or surge risk. It is not intended for standard multi-wire or AC valve wiring without a decoder system.
Informații suplimentare
| Marcă: | Rain Bird |
|---|---|
| Model: | LSP-1 |
| Part number (primary): | M98999 |
| Part number (secondary): | D16350 |
| Product code: | 01MY07 |
| Device type: | Line surge protector |
| System compatibility: | 2-wire decoder irrigation |
| Line wire colour: | Albastru |
| Ground wire colour: | Yellow/Green |
| Housing colour: | Galben |
| Termination type: | Pre-wired leads with ring terminals |
| Certification: | CE |
| Country of manufacture: | Denmark |
Documente
-
Descărcare
bevo-7042395-7042395M_info_datasheet_supplier_en
83 Ko
În detaliu
- Simple two-wire connection — blue to line, yellow/green to ground, no special tools required
- Sealed canister housing suitable for direct burial or enclosure mounting
- CE certified to European safety standards
- Protects expensive decoders and controllers from lightning-induced transients
- Compact form factor fits easily inside standard irrigation controller cabinets
- Compatible only with 2-wire decoder-based systems — not suitable for conventional multi-wire irrigation wiring
- Requires a clean, low-impedance earth ground connection to be effective
- Single-use protection: a major surge event may require device replacement