PE40 Pressure Pipe 63 mm × 5.7 mm Plain 5 bar Black – 50 m Coil - 0700021
Certified online store
Easy returns within 14 days
Looking for advice?
PE40 Pressure Pipe 63 mm × 5.7 mm Plain 5 bar Black – 50 m Coil
Rated to 5 bar working pressure with a 63 mm outer diameter and a robust 5.7 mm wall thickness, this 50 m coil of PE40 polyethylene pipe delivers a continuous, joint-free run ideal for pool plant-room supply lines, underground feed pipework, and irrigation headers. The plain (spigot) ends accept standard compression or electrofusion fittings in the 63 mm metric range, keeping installation straightforward for professionals and experienced installers alike. A maximum operating temperature of 35 °C makes it well suited to cold and ambient water-supply duties typical of European outdoor pool installations.
Material & flexibility
PE40 low-density polyethylene is inherently non-brittle and flexible, allowing the pipe to follow gentle curves in a trench without additional bends and to absorb minor ground movement without cracking. The solid black pigmentation provides UV resistance for any above-ground sections exposed during installation, and the material is inert to the chlorinated water and common pool chemicals it will carry.
Coil format & site handling
Supplied in a single 50 m coil, this pipe eliminates the need for frequent jointing along a long run, reducing potential leak points and labour time. The coil format is easy to transport to site and unroll progressively into a trench, making it a practical choice for connecting the pool to a remote plant room or for looping a main distribution header across a large pool complex.
Sizing & compatibility
The 63 mm outer diameter is a standard metric PE size, compatible with the full range of 63 mm compression couplings, electrofusion sockets, and saddle fittings widely available across European plumbing and irrigation suppliers. At 5 bar nominal pressure, this pipe comfortably exceeds the typical 1–2.5 bar dynamic pressures generated by pool circulation pumps, providing a safe margin for surge and water-hammer conditions.
Informații suplimentare
| Brand: | Unbranded |
|---|---|
| Pressure: | 5 bar |
| Connection: | plain |
| Max. temperature: | 35 °C |
| Material: | PE40 polyethylene |
| Outer diameter: | 63 mm |
| Wall thickness: | 5.7 mm |
| Pressure rating: | 5 bar |
| Connection type: | Plain (spigot) ends |
| Colour: | Black |
| Coil length: | 50 m |
In details
- 50 m coil minimises joints for long underground runs
- 5 bar rating provides safe margin over typical pump pressures
- Flexible PE40 material handles trench curves without extra fittings
- Black pigmentation offers UV resistance during installation
- 63 mm metric OD compatible with standard European fittings
- Limited to 35 °C — not suitable for heated return lines
- Large 63 mm coil requires two people to handle on site
