Blue Lagoon - Piuliță de capăt Xpose UV-C cu inel O (set de 2 bucăți) - SP0079

Blue Lagoon Xpose UV-C End Cap Nut with O-Ring (2-Piece Kit)

This genuine Blue Lagoon spare parts kit contains two end cap nuts and two matching O-rings for the Blue Lagoon Xpose UV-C pool disinfection system. The end cap nut secures the lamp housing and forms a watertight seal, and replacing worn nuts and O-rings is essential to prevent leaks and maintain safe, efficient UV-C performance.

Compatibilitate

Designed exclusively for the Blue Lagoon Xpose UV-C stand-up UV disinfection unit — a floor-standing system engineered for above-ground pools and small in-ground pools. This kit is not intended for other Blue Lagoon UV-C models; always verify your unit model before ordering.

De ce autenticitatea contează

Genuine Blue Lagoon parts are manufactured to the exact tolerances of the Xpose UV-C housing. An improperly sealed end cap can allow water ingress into the lamp assembly, creating both a leak hazard and a potential electrical safety risk. Using original parts ensures the O-ring seats correctly and the nut tightens to the correct torque without cracking the housing.

Instalare

Switch off and isolate the UV-C unit and allow it to cool before servicing. Unscrew the old end cap nut, remove the lamp and quartz sleeve carefully, fit the new O-ring onto the quartz sleeve, reinstall the lamp, and tighten the new nut securely onto the housing. Always wear protective gloves and glasses when handling the quartz sleeve and lamp. Each kit contains two nuts and two O-rings, covering both end caps of the unit in a single service.