Saltar para o conteúdo

AstralPool - Tampa transparente para filtro, Ø 173 mm, com anel de vedação - SP-04-0073

Astralpool SP-04-0073
1-3 semanas
16,95  imposto inc.
Envio Envio 1-3 semanas
Certificado Certificado loja online
Devoluções fáceis Devoluções fáceis em até 14 dias
Peça sobresselente Procura uma peça sobressalente?
Ir para vista explodida
Pergunta Procura aconselhamento?
Faça a sua pergunta

AstralPool – transparent filter lid Ø173 mm with O-ring

This is a genuine AstralPool replacement transparent filter lid with a 173 mm diameter, supplied complete with its sealing O-ring. It is designed to replace a cracked, cloudy, or leaking lid on compatible AstralPool sand filters, restoring a watertight seal and clear visibility into the filter tank.

The transparent polycarbonate construction allows you to visually inspect the filter’s operating status at a glance — without opening the tank — making routine maintenance faster and safer. The bundled O-ring ensures a proper seal is achieved from the moment of installation, eliminating the need to source the gasket separately.

Compatibilidade

This lid is intended for AstralPool sand filters that use a 173 mm diameter lid opening. AstralPool produces transparent lids of this type across its Cantabric and Millennium filter ranges. Always verify the lid diameter and closure mechanism of your specific filter model before ordering; if in doubt, consult the exploded-view diagram for your filter on the official AstralPool / Fluidra documentation portal.

Por que a autenticidade é importante

A non-genuine lid may not match the exact thread pitch, bayonet profile, or material specification of the original, risking leaks or premature cracking under pool-chemical and UV exposure. This is a 100% original AstralPool part sourced directly from Fluidra, carrying the manufacturer’s quality assurance and warranty. The included O-ring is likewise OEM-spec, ensuring correct compression and a lasting watertight joint.

Instalação

Before fitting, clean the lid seat on the filter tank and remove any remnants of the old O-ring. Seat the new O-ring in the groove without pinching or twisting, then hand-tighten the lid — never use excessive force, as over-tightening is the leading cause of O-ring deformation and lid cracking. Check for leaks on first start-up and re-seat the O-ring if necessary.

Informação adicional

Diâmetro da tampa: 173 mm (Ø173)
Material: Policarbonato transparente
Inclui: Lid + sealing O-ring
Tipo de peça: Peça sobressalente de substituição OEM
Tipos de filtros compatíveis: AstralPool sand filters with Ø173 mm lid (verify model before ordering)
Marca: AstralPool (Fluidra)

Esta peça sobressalente é adequada para: