Davey - EcoSalt 2 LCD Screen PCB with Screws - 33188SP

Davey – EcoSalt 2 LCD Screen PCB with Screws (33188SP)

This is the genuine Davey replacement LCD screen PCB assembly (part 33188SP) for the EcoSalt 2 salt chlorination system. The LCD screen is the primary user interface of the EcoSalt 2 controller, displaying system status, current time, and chlorine output percentage, and providing access to operating modes such as Boost and Pool Cover Mode. It is typically replaced when the display becomes unreadable, damaged, or fails to respond correctly.

Compatibility

This part fits the full Davey EcoSalt 2 range, covering all output variants — 15 g/h, 25 g/h, and 35 g/h — in both Standard and Low Salt configurations (DES2-15E, DES2-15ELS, DES2-25E, DES2-25ELS, DES2-35E and equivalent models). It is listed in the official Davey EcoSalt 2 spare parts diagram and is also shared with the Australian-market Davey Nipper chlorinator series. If in doubt, cross-reference your model number with Davey Europe or your authorised Davey dealer before ordering.

Why Genuine Matters

Using an original Davey LCD screen PCB ensures full electronic compatibility with the EcoSalt 2 control board, preserving accurate display of salt levels, flow status, and chlorine output readings. Third-party substitutes may not interface correctly with the controller firmware, risking unreliable readings or loss of safety indicators such as the low-salt and no-flow alerts.

Installation

The assembly includes the mounting screws needed for a complete swap. Replacement involves accessing the controller housing, disconnecting the existing screen connector, and securing the new PCB in place with the supplied screws. Work should be carried out with the unit fully isolated from the mains supply. Professional installation by a qualified pool technician or electrician is strongly recommended to maintain safety compliance and warranty validity.