Rated to 30 bar and 120 \u00b0C, this compact 33 mm brass adaptor transitions a 1\/4″ male thread to a 6 mm hose tail \u2014 making it a reliable choice for chemical dosing lines, pressure gauge connections, and ancillary pipework on pool plant rooms. The 14 mm spanner flat allows controlled tightening without risk of over-torque in confined installations.<\/p>\n
Machined from solid brass, the adaptor offers excellent resistance to the minor corrosion and scale build-up common in pool and spa plant environments. A 30 bar maximum working pressure gives a generous safety margin well above the operating pressures seen in domestic and commercial pool systems, while the 120 \u00b0C temperature ceiling makes it suitable for heat pump and solar heating circuits alike.<\/p>\n
The 1\/4″ male threaded end is compatible with standard BSP ports found on pool pumps, filters, pressure gauges, and dosing equipment. The barbed 6 mm hose tail grips flexible tubing securely when used with a suitable hose clamp, creating a leak-resistant transition between rigid pipework and flexible hose runs.<\/p>\n
At just 33 mm in overall length, this fitting fits neatly into tight manifold arrangements and equipment cupboards typical of pool plant rooms. The 14 mm spanner flat across the hex body enables straightforward installation with a standard open-ended spanner, and the fitting can be sealed with PTFE tape or thread sealant at the male thread end.<\/p>","protected":false},"excerpt":{"rendered":"