This page presents the official exploded-view diagram and full bill of materials for the Norsup Heat Pump, Type Inverter, model designation XP35DCSI T, carrying Norsup factory reference 7021083<\/strong>. The XP35DCSI T is a 230 V single-phase, full-inverter pool heat pump in the 35 kW output class, designed for horizontal installation and featuring a variable-speed compressor and fan that automatically modulate heating capacity to match ambient conditions. Whether you are a pool owner carrying out routine maintenance or a technician diagnosing a fault, the diagram and parts list below cover every major assembly \u2014 from the refrigerant circuit and electrical box through to the water-side connections. Use the numbered positions and their corresponding SKUs to identify the exact part you need in just a few minutes.<\/p>\n Every circled or arrowed call-out number printed on the diagram corresponds directly to a numbered row in the parts list below it; the description and, where available, the SKU in that row are what you need to add to your basket. The most reliable workflow is to locate the general area of the unit where the fault or wear is \u2014 for example, the water-side connections, the refrigerant circuit, or the electrical box \u2014 and then trace the relevant call-out numbers in that area of the drawing. Once you have the position number, find it in the list, read across to confirm the description matches the component in front of you, and note the SKU. Bear in mind that the same position number can appear in more than one location on the diagram when an identical component is used in multiple spots; for instance, positions 58 and 65 both refer to the Water connection set (SKU 7014153) because the same fitting is used at both the inlet and outlet. Take particular care with lettered variants such as 22a and 22b, which share the same position area on the diagram but represent physically different parts that cannot be interchanged \u2014 always confirm the suffix before ordering. If a position in the list carries no SKU, the component is not currently offered as a standalone spare on this site; contact our team for guidance on those items. Always cross-reference the description against what you see on the unit, not just the position number alone, as a single number reused across sub-assemblies is the most common cause of an incorrect order.<\/p>\n The XP35DCSI T is built around five distinct sub-systems, each grouping several numbered positions. The zesp\u00f3\u0142 po stronie lotniskowej<\/strong> comprises the fan motor (pos. 15, SKU 7021812) and the 496 mm fan blade with its 12 mm anti-clockwise-rotation hub (pos. 16, SKU 7021815), both mounted on the fan motor bracket (pos. 14) within the top frame (pos. 12). The obieg ch\u0142odniczy<\/strong> runs through the compressor (pos. 26), the 4-way reversing valve (pos. 50) and its associated pipework (pos. 47, 56), the electronic expansion valve or EEV (pos. 44), the filter (pos. 43), and the fluid reservoir (pos. 27), with pressure protection provided by the high-pressure switch rated 3.6\u20134.2 MPa (pos. 49, SKU 7024793) and two low-pressure switch variants \u2014 0.1\u20130.3 MPa (pos. 53, SKU 7024791) and 0.2\u20130.35 MPa (pos. 54, SKU 7024792). The water-side assembly<\/strong) centres on the titanium heat exchanger (pos. 67, SKU 7021833), which is protected and monitored by the water flow switch (pos. 61, SKU 7020257), the water inlet temperature sensor TH6 (pos. 63, SKU 7020263), and the water outlet temperature sensor TH5 (pos. 68, SKU 7020262); both water connections use the same connection set (pos. 58 and 65, SKU 7014153). The zesp\u00f3\u0142 skrzynki elektrycznej<\/strong> (pos. 79) houses the main PC board SHZKA0101 (pos. 77, SKU 7021837), the driver board SHQ05T0101 (pos. 71, SKU 7021839), the relay CJX9B-25S\/D (pos. 76, SKU 7010519), the filter board (pos. 75), and the magnet rings (pos. 73, 74), all enclosed behind the electric box cover (pos. 70). Finally, the user-interface assembly<\/strong> groups the waterproof display box (pos. 21, SKU 7010543) with the LED display board \u2014 either the standard SHHCLEDV2MM101 (pos. 22a, SKU 7021826) or the Wi-Fi-enabled WiFi02iMM011 variant (pos. 22b, SKU 7023600) \u2014 mounted behind the front grill (pos. 20) and front panel (pos. 19). The exhaust temperature sensor TH3 (pos. 48, SKU 7020261) sits on the high-pressure exhaust side of the compressor circuit and is a common first check when high-temperature fault codes appear. The pressure gauge (pos. 32, SKU 7010518) gives a visual indication of refrigerant-circuit pressure and is located on the terminal panel area (pos. 31).<\/p>\n The most important variant choice on this diagram is at position 22, where two LED display boards are offered: pos. 22a (SKU 7021826, model SHHCLEDV2MM101) is the standard display, while pos. 22b (SKU 7023600, model WiFi02iMM011) is the Wi-Fi-enabled version that allows the unit to be controlled via a smartphone app. These two boards share the same waterproof display box (pos. 21) but have different connector layouts, so confirm which board is currently fitted before ordering a replacement. Similarly, positions 53 and 54 are two distinct low-pressure switches with overlapping but different pressure ranges (0.1\u20130.3 MPa and 0.2\u20130.35 MPa respectively); fitting the incorrect range will prevent the unit from operating safely, so match the rating printed on the switch body or in the unit’s service documentation before ordering. For the water connection sets at positions 58 and 65, both carry the same SKU (7014153), confirming they are identical parts \u2014 if you are replacing both inlet and outlet fittings at the same time, simply order a quantity of two. When ordering any sealing rings, such as the blue rubber ring (pos. 59), the red rubber ring (pos. 66), the exchanger connection sealing ring (pos. 60), or the sealing ring for the water flow switch (pos. 62), take care to verify the diameter against the component on the unit, as ring dimensions are not always interchangeable between positions even when they appear visually similar.<\/p>","protected":false},"excerpt":{"rendered":"Jak skorzysta\u0107 z numerowanego schematu, aby znale\u017a\u0107 potrzebn\u0105 cz\u0119\u015b\u0107<\/h3>\n
Main replaceable assemblies on the Norsup Heat Pump Inverter (Type XP35DCSI T)<\/h3>\n
Wyb\u00f3r mi\u0119dzy wariantami a rozmiarami opakowa\u0144<\/h3>\n