Maytronics Dolphin C6 power supply unit 180W - 46663R0001

Maytronics Dolphin C6 power supply unit 180W

This is the genuine Maytronics 180W power supply unit designed for the Dolphin C6 robotic pool cleaner. It converts mains AC voltage to the regulated DC output required to drive the robot’s motors and control electronics, making it the heart of the entire cleaning system. Without a correctly functioning power supply, the Dolphin C6 will not operate at all.

Function and electrical specification

The unit accepts a wide-range AC mains input (100–250 VAC, 50/60 Hz) and delivers a regulated DC 29 V output at 180 W — precisely matched to the Dolphin C6’s motor and control-board requirements. The low-profile housing incorporates an aluminium heat sink in the base for effective thermal management during extended cleaning cycles.

Compatible Dolphin models

This power supply unit is confirmed compatible with the Dolphin C6. Maytronics also lists 180W PSU variants as compatible with related models including the Dolphin Wave 100, Dolphin Wave 80, Dolphin C5 PRO, Dolphin Pro X1, Dolphin Pro X2 and Dolphin DX5 — always verify against your robot’s serial number before ordering, as power supply variants differ by feature set.

Symptoms that indicate replacement is needed

The most obvious sign of a failed power supply is a Dolphin C6 that shows no sign of life when powered on — no indicator lights, no motor movement, no response from the cable. Intermittent operation, the robot stopping mid-cycle without error, or a unit that trips the mains circuit are equally strong indicators that the PSU has failed and must be replaced rather than repaired.

Why genuine Maytronics parts matter

Maytronics designs each power supply specifically to match the voltage, current profile and communication signals of the corresponding robot platform. Third-party substitutes frequently deliver incorrect output voltages or lack adequate surge protection, which can damage the robot’s control board — a far more costly repair. A genuine Maytronics replacement unit carries the manufacturer’s warranty and is built to the same safety and EMC standards as the original.