AstralPool – Pokrywa filtra wstępnego z uszczelką do pompy Glass Plus SS 1,5 HP II – 4405012202

AstralPool – Pre-filter Cover with Gasket for Glass Plus SS 1.5HP II Pump

This is the genuine AstralPool replacement pre-filter cover with integrated gasket for the AstralPool Glass Plus SS 1.5HP II self-priming pool pump (parent SKU 15244). Sitting at position 3 in the official Fluidra exploded view, it forms the watertight seal over the pump’s pre-filter housing, keeping debris contained and the hydraulic circuit pressurised. Replacing a worn or cracked cover restores full pump performance and prevents air ingress or water leaks.

Kompatybilność

This part is engineered specifically for the AstralPool Glass Plus SS 1.5HP II pump (Fluidra reference 15244). Always cross-reference your pump’s model number and the exploded-view position (position 3) before ordering to ensure a precise fit. If you are unsure, contact our team with your pump’s rating plate details.

Dlaczego oryginalność ma znaczenie

As an original Fluidra/AstralPool component, this cover and gasket are manufactured to exact dimensional tolerances, ensuring a leak-free seal against the pre-filter body. Aftermarket alternatives may differ in thread pitch or gasket compound, risking air leaks, reduced suction, and premature pump wear. Fitting a genuine part protects your warranty and keeps the pump running at rated efficiency.

Instalacja

The cover is designed for straightforward hand-tightening — no specialist tools are required to open or close the pre-filter housing. Always isolate the pump from power and relieve system pressure before removing the old cover. Inspect and clean the seating surface, fit the new cover with its gasket in place, and tighten firmly by hand until the seal is snug. Restart the pump and check for leaks before returning the system to normal operation.