This is a genuine Fluidra (AstralPool) replacement O-ring with a 70 mm inner diameter and a 5 mm cross-section, designed to create a watertight seal at the drain\/bleed fitting located at the base of compatible AstralPool sand filters. It is the correct part to fit when the existing O-ring has aged, deformed, or cracked and is causing water to leak around the drain port.<\/p>\n
This O-ring fits a range of AstralPool lateral-outlet sand filters, including the \u00d8 1050 mm \/ 43,000 l\/h series (refs 15789 and 32391), the \u00d8 900 mm Atlas and Aster models, and the Vesubio filter range. Always cross-reference your filter’s model number and exploded-view diagram before ordering to confirm fitment for your specific unit.<\/p>\n
Genuine Fluidra seals are manufactured to exact dimensional tolerances and from pool-grade elastomer compounds that resist prolonged exposure to chlorinated water, UV, and pressure cycling. An aftermarket seal of slightly incorrect dimensions or inferior material can fail prematurely, leading to persistent leaks and the risk of sand or water damage around the filter base.<\/p>\n
Shut off the filtration system and relieve any pressure before starting. Remove the drain fitting, extract the worn O-ring, clean the seat thoroughly, and lightly lubricate the new O-ring with a silicone-based grease before seating it. Reassemble the fitting, restore pressure, and check for leaks before returning the system to normal operation.<\/p>","protected":false},"excerpt":{"rendered":"