This is the genuine Fluidra replacement air bleed assembly for the Europe Filter \u00d81050-75MM sand filter (1.0 m filter bed, 2.5 kg\/cm\u00b2 max. working pressure). The assembly provides a manual air-relief point on the filter lid, allowing trapped air to be safely vented from the pressurised vessel before and during operation. Keeping this component in good working order is essential for maintaining correct filter pressure and preventing potential damage to the tank.<\/p>\n
Over time, air can accumulate inside a sand filter, causing pressure to build up inside the vessel. Opening the air bleed assembly releases this trapped air slowly and safely \u2014 once water begins to flow from the valve, the air has been fully purged and the valve can be closed. A functioning air bleed assembly is also required when draining or servicing the filter, allowing the system to depressurise in a controlled manner before the lid is removed.<\/p>\n
This assembly is the OEM-specified part for the Fluidra Europe Filter \u00d81050-75MM 1.0M 2.5KG\/CM\u00b2 sand filter. Always verify your filter model and existing air bleed fitting before ordering to ensure a correct fit. If you are unsure, cross-reference the part number 4404170103 with your filter’s original parts diagram.<\/p>\n
As a genuine Fluidra spare part, this air bleed assembly is manufactured to the exact tolerances of the original component, ensuring a reliable seal under the filter’s rated working pressure of 2.5 kg\/cm\u00b2. Aftermarket alternatives may not match thread pitch or seal geometry, risking leaks at a safety-critical point in the system. Choosing the genuine part protects both the filter and the people using the pool.<\/p>","protected":false},"excerpt":{"rendered":"