This is a genuine Fluidra replacement manifold arm assembly designed for the Europe Filter commercial sand filters in \u00d81050 mm and \u00d81200 mm tank sizes, with a 1\u00bd” connection. The manifold arm assembly sits at the base of the filter tank, collecting filtered water from the sand bed and channelling it evenly to the return outlet while preventing sand or media from passing through to the pool.<\/p>\n
This assembly is a direct OEM spare part for the Fluidra Europe Filter range \u2014 specifically the \u00d81050 mm and \u00d81200 mm models with a 1\u00bd” outlet and a maximum working pressure of 2.5 kg\/cm\u00b2 (2.5 bar). Always verify your filter’s tank diameter, outlet size, and pressure rating before ordering to ensure a correct match.<\/p>\n
Genuine Fluidra manifold arms are precision-engineered to match the exact internal geometry of the Europe Filter tank, ensuring a leak-free seat and correct lateral spacing across the sand bed. Using a non-genuine part risks uneven filtration, sand bypass, or premature component failure \u2014 particularly in high-flow commercial installations where hydraulic loads are significant.<\/p>\n
The manifold arm assembly replaces the entire collector arm unit at the bottom of the filter vessel. Installation requires draining the filter, removing the sand media, and fitting the new assembly before recharging with filter sand. Due to the scale of commercial Europe Filter units, professional installation by a qualified pool technician is strongly recommended.<\/p>","protected":false},"excerpt":{"rendered":"