This is a genuine Fluidra replacement manifold arm assembly designed for the Fluidra Europe Filter with a 1,400 mm tank diameter. The manifold arm sits at the base of the filter tank and is a critical part of the internal collector system, distributing filtered water evenly across the sand bed during filtration and enabling effective backwashing. With a 1\u00bd” connection size, it is precisely matched to the plumbing configuration of the \u00d81400 Europe Filter range.<\/p>\n
This manifold arm assembly is a direct replacement part for the Fluidra Europe Filter \u00d81400 series \u2013 a heavy-duty commercial polyester and fibreglass sand filter rated to 2.5 kg\/cm\u00b2 (2.5 bar) with a 1.0 m filter bed depth. It is not compatible with other tank diameters in the Europe Filter range (such as \u00d81050, \u00d81200, \u00d81600 or larger models) or with other Fluidra filter families. Always verify your filter’s tank diameter and plumbing connection size before ordering.<\/p>\n
Using an authentic Fluidra OEM part ensures the manifold arm fits the exact internal dimensions of the \u00d81400 tank, maintaining correct flow distribution across the filter bed and reliable performance during backwash cycles. Aftermarket alternatives may not match the precise slot geometry or material specification, risking uneven filtration, sand carry-over, or premature failure in a commercial installation.<\/p>\n
The manifold arm assembly connects into the central hub of the filter’s internal collector system at the base of the sand bed. Given the commercial scale of the Europe Filter \u00d81400 \u2013 which requires up to 1,820 kg of sand and operates at significant flow rates \u2013 replacement of internal components should be carried out by a qualified pool technician with the filter fully drained and depressurised. Consult the Fluidra Europe Filter service documentation for the correct torque specifications and reassembly sequence.<\/p>","protected":false},"excerpt":{"rendered":"