This is the genuine Fluidra diffuser assembly designed for the Europe Filter with a 1,400 mm tank diameter and 75 mm pipe connections. Positioned at the top of the filter vessel, the diffuser distributes incoming water evenly across the full surface of the sand bed, maximising filtration efficiency and preventing channelling. It is a direct OEM replacement, maintaining the original hydraulic performance of your commercial sand filter.<\/p>\n
This diffuser assembly is specifically engineered for the Fluidra Europe Filter \u00d81400 with a 75 mm outlet connection, 1 m filter bed depth, and a maximum working pressure of 2.5 kg\/cm\u00b2 (2.5 bar). It fits the Europe Filter model 21497 (\u00d81,400 mm \u2013 30 m\u00b3\/h \u2013 75 mm outlet \u2013 1 m bed \u2013 2.5 bar). Always verify your filter’s model code and connection size before ordering, as other Europe Filter variants use different diffuser assemblies.<\/p>\n
The Europe Filter range is a polyester and fibreglass construction, totally corrosion-resistant and suitable for salt-water installations. Using a genuine Fluidra replacement diffuser ensures the correct fit, correct slot sizing, and long-term chemical resistance \u2014 all essential for sustained filtration performance in commercial and large residential pools. Aftermarket parts may not replicate the precise hydraulic geometry of the original component.<\/p>\n
Replacing the diffuser assembly requires depressurising the filter vessel and accessing the internals through the top lid. The assembly locates centrally above the sand bed and connects to the inlet pipework. On large commercial filters of this size, it is strongly recommended that a qualified pool technician carries out the work to ensure correct seating and a pressure-tight installation.<\/p>","protected":false},"excerpt":{"rendered":"