This is the genuine Fluidra collector assembly designed for the Europe Filter \u00d81600 mm sand filter with a 1.0 m filter bed depth and 2.5 kg\/cm\u00b2 (2.5 bar) pressure rating. The collector sits at the base of the filter tank and gathers filtered water through its lateral arms, directing the clean water efficiently to the 110 mm outlet connection. It is an essential internal component for correct filtration performance and backwash operation.<\/p>\n
This collector assembly is engineered specifically for the Fluidra Europe Filter \u00d81600 mm, 110 mm outlet, 1.0 m filter bed, 2.5 kg\/cm\u00b2 variant. The Europe Filter range is a heavy-duty commercial sand filter series built from polyester and fibreglass, rated for flow rates of 50\u201370 m\u00b3\/h on the 1600 mm tank. Always confirm your filter’s tank diameter, bed depth, pressure rating, and outlet diameter before ordering, as different Europe Filter models use different collector sizes.<\/p>\n
As a genuine Fluidra OEM part, this collector assembly is manufactured to exact dimensional and pressure tolerances for the Europe Filter series. An incorrectly sized or aftermarket collector can lead to bypass of unfiltered water, poor backwash efficiency, or structural failure under pressure. Using the correct genuine part protects the filter vessel and ensures continued compliance with the filter’s rated working pressure of 2.5 bar.<\/p>\n
The collector assembly is located at the bottom of the filter tank and is accessed by removing the filter lid and the filter media (sand). Due to the volume of sand involved in a 1600 mm commercial filter, replacement of this component is a significant undertaking and is strongly recommended to be carried out by a qualified pool technician. Ensure the system is fully depressurised and isolated before beginning any work.<\/p>","protected":false},"excerpt":{"rendered":"