This is the genuine Fluidra outlet assembly designed for the Europe Filter with a \u00d82350 mm tank and a 140 mm pipe connection. It forms the critical downstream collector through which filtered water exits the filter vessel and returns to the pool. Replacing a worn or damaged outlet assembly with an OEM part ensures the hydraulic integrity and safe pressure rating of your commercial filtration system.<\/p>\n
This outlet assembly is specifically engineered for the Fluidra Europe Filter \u00d82350 mm with 140 mm pipe connections, rated to 2.5 bar (2.5 kg\/cm\u00b2) operating pressure and a 1.0 m filter bed depth. The Europe Filter range is a large-diameter commercial fiberglass and polyester sand filter used in public pools, hotel pools, and other high-flow commercial installations. Always verify your filter’s tank diameter, pipe connection size, and pressure rating before ordering.<\/p>\n
Fluidra OEM parts are manufactured to the exact dimensional and pressure tolerances of the original filter specification. A non-genuine outlet assembly risks improper fit, seal failure, or inadequate pressure resistance \u2014 any of which can cause unplanned downtime or safety issues on a commercial installation. Fitting the correct genuine part maintains manufacturer compliance and protects the integrity of the overall filtration system.<\/p>\n
This assembly is designed for professional installation within the filter tank. Before commencing any work, isolate the system, fully depressurise the filter vessel, and drain it down. Ensure all mating seals and gaskets are inspected and replaced as needed during the service. Given the commercial scale of the Europe \u00d82350 filter, installation by a qualified pool technician is strongly recommended.<\/p>","protected":false},"excerpt":{"rendered":"