This is the genuine Fluidra replacement collector manifold assembly designed for the \u00d8900 mm sand filter with a 32,000 l\/h flow rating and 2″ side-outlet lateral multiport valve. The collector sits at the base of the filter tank and is responsible for gathering filtered water through its slotted laterals and directing it out through the 2″ outlet connection. It is an essential internal component for maintaining efficient filtration and correct water distribution during both the filter and backwash cycles.<\/p>\n
This collector manifold assembly is specifically engineered for the Fluidra \u00d8900 mm laminated sand filter rated at 32,000 l\/h, fitted with a 2″ side-outlet multiport selector valve. Always verify your filter’s tank diameter, outlet size, and model reference before ordering, as collector assemblies are not interchangeable across different tank diameters.<\/p>\n
As a genuine Fluidra spare part, this collector manifold is manufactured to the exact dimensions and material specifications of the original component. The precise fit of the hub and laterals ensures correct water distribution across the full filter bed, preventing channelling, sand bypass, and premature wear. Aftermarket alternatives may not match the slot geometry or connection sizing, risking poor filtration performance and potential damage to the filter tank.<\/p>\n
Replacing the collector manifold requires draining and opening the filter tank, removing the existing sand bed, and unbolting the worn assembly before fitting the new one. Due to the size of the \u00d8900 mm tank and the volume of filter media involved, this job is best carried out by a qualified pool technician. Ensure all laterals are fully seated and the 2″ connection is correctly sealed before refilling with fresh filter sand and recommissioning the system.<\/p>","protected":false},"excerpt":{"rendered":"