This is the complete genuine Fluidra drain water set for the Artic OC-1 laminated fibreglass sand filter range in diameters 500, 650, 800 and 950 mm. The kit supplies all the components needed to fully drain the filter tank \u2014 including the drain plug, body and seal \u2014 making seasonal winterisation, filter media changes and maintenance straightforward. It is the correct revision for all Artic OC-1 units produced from March 2013 onwards.<\/p>\n
This drain set is designed exclusively for the Fluidra Artic OC-1 high-performance laminated polyester and fibreglass filter range in the four standard tank diameters: \u00d8500 mm, \u00d8650 mm, \u00d8800 mm and \u00d8950 mm. Always confirm your filter’s production date is March 2013 or later before ordering, as earlier units use a different drain assembly.<\/p>\n
Genuine Fluidra parts are manufactured to the exact tolerances of the original filter housing. The Artic OC-1 operates at up to 2.5 bar working pressure, so using an OEM-spec drain assembly with the correct seal ensures a reliable, leak-free fit that aftermarket alternatives may not guarantee. Genuine parts also protect any remaining manufacturer warranty on the filter vessel.<\/p>\n
The drain set is located at the base of the filter tank. Isolate the pump, relieve system pressure and close isolation valves before removing the old drain assembly. Thread the new set in by hand first, then tighten to the torque specified in your Artic OC-1 installation manual. Do not over-tighten, as the filter body is laminated polyester. Professional installation is recommended if you are not experienced with pressurised filtration systems.<\/p>","protected":false},"excerpt":{"rendered":"