This is the genuine Fluidra collector arm assembly designed for the Artic D. laminated sand filter range in \u00d81050 mm tank diameter. The collector arms sit at the base of the filter tank and are responsible for evenly distributing water during filtration and collecting it efficiently during backwash, ensuring correct circulation throughout the entire filter bed.<\/p>\n
This assembly is a direct replacement part for the Fluidra Artic D. Filter series with tank diameters of \u00d81050 mm and \u00d81200 mm (reference models 41188 and 41189), fitted with 90 mm flange connections. These large-diameter laminated polyester and fibreglass filters are commonly used in commercial and high-capacity residential pool installations. Always verify your filter model and connection size before ordering.<\/p>\n
The Fluidra-original collector arms feature precisely manufactured 0.3 mm slots uniformly distributed across the PP arms, ensuring even water flow through the sand bed and preventing filter media from bypassing into the pool return. A worn or incorrectly sized aftermarket collector can compromise filtration quality and lead to costly sand loss. Genuine Fluidra parts guarantee a perfect fit and long-term reliability.<\/p>\n
The collector assembly is located at the base of the filter vessel and typically requires draining the filter tank, removing the bolted \u00d8400 mm lid, and carefully extracting the old assembly before fitting the replacement. Due to the size and working pressure of these filters (up to 2.5 bar), installation by a qualified pool technician is strongly recommended. Ensure all gaskets and connections are inspected and re-sealed as part of the service.<\/p>","protected":false},"excerpt":{"rendered":"