This is the genuine Fluidra replacement water distributor for the Volcano commercial sand filter in \u00d81050 and \u00d81200 mm tank sizes. Fitted internally, it evenly distributes the incoming flow across the full cross-section of the filter bed and collects filtered water during normal operation, ensuring consistent filtration performance throughout the tank. The 2\u00bd” connection matches the large-bore pipework typical of these high-flow commercial installations.<\/p>\n
This distributor is designed specifically for the Fluidra Volcano sand filter series in \u00d81050 mm and \u00d81200 mm tank diameters. Always verify your filter model and tank diameter before ordering, as Fluidra produces distributors in multiple sizes for different filter ranges \u2014 this part is not interchangeable with smaller Volcano models or other filter families.<\/p>\n
A correctly functioning distributor is critical to uniform flow distribution across the sand bed. A damaged or ill-fitting distributor causes channelling, poor filtration efficiency, and excessive turbidity in the pool water. Using a genuine Fluidra part guarantees an exact fit, correct flow geometry, and materials rated for the pressures and chemistries of commercial pool environments.<\/p>\n
Installation requires draining and opening the filter tank via its access lid or manhole. The distributor is secured to the central riser pipe and must be properly seated and sealed before the tank is refilled. Given the size and pressure ratings of commercial \u00d81050\u20131200 mm filters, this work should be carried out by a qualified pool technician.<\/p>","protected":false},"excerpt":{"rendered":"