This is the genuine Fluidra replacement fixing nut with integrated gasket for the Multiflow return inlet used in panel pools. The nut threads onto the rear of the inlet body, clamping it securely through the pool panel wall while the gasket creates a watertight seal \u2014 preventing leaks at the point of installation.<\/p>\n
This fixing nut with gasket is a spare part for the Fluidra AstralPool Multiflow return inlet (ref. 33091) designed for panel pools with a wall thickness of 10 to 15 cm. It is not intended for concrete, fibreglass or liner pools that use different inlet assemblies \u2014 always verify your inlet model before ordering.<\/p>\n
Using a genuine Fluidra part ensures the nut thread pitch, outer diameter and gasket compound match the original tolerances exactly. Off-brand equivalents may fit loosely or use inferior gasket materials that degrade quickly in chlorinated water, leading to leaks or premature failure of the entire inlet assembly.<\/p>\n
The fixing nut is tightened from the back of the pool panel onto the inlet body, which is inserted from the water side and glued to a \u00d8 50 mm pipe. Ensure the gasket is seated flat and undamaged before tightening. Hand-tighten first, then snug with a strap wrench \u2014 do not over-torque, as ABS threads can crack under excessive force.<\/p>","protected":false},"excerpt":{"rendered":"