This is the genuine Fluidra replacement manifold assembly designed specifically for the Artic Plus \u00d8950 mm sand filter. The manifold acts as the central hub of the filter’s internal collector arm system, distributing water evenly across the filtration bed and collecting filtered water for return to the pool. Replacing a damaged or worn manifold restores full hydraulic efficiency and prevents unfiltered water from bypassing the sand bed.<\/p>\n
This manifold assembly is a direct-fit spare part for the Fluidra Artic Plus sand filter range in the \u00d8950 mm diameter. The Artic Plus D. 650\u2013800\u2013950 series are high-performance, fibreglass-laminated commercial and semi-commercial filters featuring a collector arm system made of polypropylene with 0.3 mm slots. Always verify your filter’s model reference before ordering, as manifold dimensions differ across diameter variants (\u00d8650, \u00d8800 and \u00d8950 are not interchangeable).<\/p>\n
The manifold sits at the base of the filter tank and connects to the lateral collector arms that span the filtration bed. Water entering from the multiway valve is directed through the manifold and distributed uniformly upward through the sand during backwash, and collected uniformly during filtration \u2014 ensuring consistent flow across the full 0.66 m\u00b2 filtering area of the \u00d8950 model. The polypropylene construction resists chlorinated pool water and the mechanical stresses of continuous operation at up to 2.5 bar.<\/p>\n
As an OEM Fluidra part, this manifold assembly is precision-matched to the Artic Plus \u00d8950 tank geometry and arm configuration. Aftermarket alternatives may differ in slot dimensions, arm spacing or fitting tolerances, risking poor water distribution, sand channelling or premature failure. A genuine replacement guarantees the original filtration performance and protects your filter warranty.<\/p>","protected":false},"excerpt":{"rendered":"