This is the genuine Fluidra 2″ pipe fitting with seals, designed as a direct replacement connection component for the Baracuda Filter WS2 \u00d8750 sand filter. The kit provides the fitting body together with its matching seals\/gaskets, giving you everything needed to re-establish a leak-free hydraulic connection in a single purchase. It is an essential spare whenever a fitting becomes cracked, cross-threaded, or starts leaking at the tank connection point.<\/p>\n
This fitting is a dedicated spare part for the Fluidra Baracuda WS2 series sand filter with a 750 mm tank diameter and 2″ pipework connections. Always verify your filter model and connection size before ordering, as Fluidra produces similar fittings in different sizes for other filter models \u2014 this specific part is not interchangeable with 1\u00bd” variants or other filter ranges.<\/p>\n
Genuine Fluidra parts are manufactured to the exact dimensional tolerances and material specifications of the original filter, ensuring a pressure-tight seal under normal pool operating conditions. Aftermarket fittings may differ subtly in thread pitch or seal groove dimensions, leading to persistent leaks or premature seal failure. Sourcing direct from poolparthub.com guarantees you receive an authentic Fluidra component backed by the manufacturer’s quality standards.<\/p>\n
Before fitting, inspect the mating port on the filter tank for any damage or old sealant residue and clean thoroughly. Install the included seals\/gaskets dry \u2014 do not use PTFE tape on the sealing faces \u2014 and tighten the fitting to hand-tight plus a quarter turn to avoid over-stressing the tank threads. Confirm the installation is leak-free by running the filter at normal pressure before returning the system to service.<\/p>","protected":false},"excerpt":{"rendered":"