This is the genuine Fluidra replacement base foot for the Cantabric \u00d8900 mm filament-wound sand filter. It forms the structural foundation of the filter tank, keeping it stable and correctly elevated on the plant room floor. The glued (bonded) construction method is standard on this large-diameter model, providing a high-integrity, pressure-resistant joint between the base and the filter vessel.<\/p>\n
This base foot is designed specifically for the Fluidra AstralPool Cantabric sand filter with a tank diameter of 900 mm (valve-free version, assembly reference 22402). It is not interchangeable with smaller-diameter Cantabric or other filter series. Always verify your filter’s assembly reference and tank diameter before ordering.<\/p>\n
On a large commercial or semi-commercial filter operating at up to 2.5 bar working pressure, a correctly rated, manufacturer-approved base is essential for safe, long-term operation. Genuine Fluidra parts are manufactured to the same specification as the original, ensuring dimensional accuracy and material compatibility with the fibreglass-reinforced polyester tank body.<\/p>\n
Replacement of a glued filter base is a structural repair that typically requires draining and decommissioning the filter. Professional installation by a qualified pool technician is strongly recommended. Ensure the bonding surface is clean and dry and use an appropriate adhesive compatible with fibreglass-reinforced polyester before re-commissioning.<\/p>","protected":false},"excerpt":{"rendered":"