This is the genuine Fluidra replacement base (lower body section) designed specifically for the Fluidra Europe commercial sand filter with a 1200 mm tank diameter. The base forms the structural foundation of the filter vessel, housing the hydraulic connections and supporting the full weight of the sand bed and water in service. It is an essential structural and hydraulic component \u2014 without an intact base, safe filter operation is not possible.<\/p>\n
This base is engineered exclusively for the Fluidra Europe Filter range at \u00d81200 mm diameter. The Europe Filter series covers tank diameters from 1050 mm up to 2000 mm, and each size uses a dedicated base, so correct diameter selection is critical before ordering. If you are unsure of your filter’s exact model or diameter, check the rating plate on your existing vessel or consult your installation documentation.<\/p>\n
As a load-bearing pressure vessel component, the filter base must meet the same structural and chemical-resistance standards as the original. Fluidra’s Europe Filter tanks are manufactured from fiberglass and polyester resin with high-quality engineering plastics for internal fittings, and are rated to 2.5 bar operating pressure. Using a genuine OEM Fluidra base ensures dimensional accuracy, correct port alignment, and maintained pressure-vessel integrity \u2014 protecting both the installation and its users.<\/p>\n
Replacement of a filter base is a major intervention requiring the filter to be fully drained, de-pressurised, and the sand media removed before work begins. Given the size and weight of a 1200 mm commercial filter, this task should only be carried out by a qualified pool technician with appropriate lifting equipment. Ensure all gaskets and sealing faces are inspected and replaced as needed during the rebuild.<\/p>","protected":false},"excerpt":{"rendered":"