This is a genuine Fluidra manifold arm assembly designed as a direct replacement for the internal lateral collector system of the Fluidra Europe Filter with a 2350 mm tank diameter, 1.2 m filter bed depth, and a working pressure rating of 2.5 kg\/cm\u00b2. The manifold arm sits at the base of the filter tank, collecting filtered water from the sand bed and directing it to the outlet during normal filtration, while also distributing backwash water evenly across the bed during cleaning cycles.<\/p>\n
This part is specifically sized for the Fluidra Europe Filter \u00d82350 mm with a 1.2 m sand bed and a maximum operating pressure of 2.5 kg\/cm\u00b2 (approx. 2.5 bar). The Europe Filter range is a large-format commercial fiberglass sand filter available for flow rates of up to 108\u2013152 m\u00b3\/hr at the 2350 mm diameter. Always verify your filter’s tank diameter, bed height, and pressure rating against your unit’s documentation before ordering, as manifold arm dimensions vary across the Europe Filter range.<\/p>\n
As an OEM Fluidra part, this manifold arm assembly is manufactured to the exact tolerances of the original component, ensuring a secure fit within the tank and consistent hydraulic performance across both filtration and backwash modes. Aftermarket substitutes may not match the slotted geometry or pipe dimensions needed for correct flow distribution, risking channelling through the sand bed and reduced filtration efficiency.<\/p>\n
Replacement requires draining and opening the filter tank to access the internal collector assembly. The manifold arm connects to the central collector hub at the base of the filter. Given the large format and pressurised nature of this commercial filter, installation should be carried out by a qualified pool technician, with all connections checked for correct seating and the system pressure-tested before returning to service.<\/p>","protected":false},"excerpt":{"rendered":"